The John Deere F710 is 139 in long, 54 in wide, and 94.5 in tall.
Length139 in (11 ft 7 in) / 3,530.6 mm
Width54 in (4 ft 6 in) / 1,371.6 mm
Height94.5 in (7 ft 10.5 in) / 2,400.3 mm
John Deere F710 Dimensions
Overall length
139 in (11 ft 7 in) / 3,530.6 mm
Overall width
54 in (4 ft 6 in) / 1,371.6 mm
Overall height
94.5 in (7 ft 10.5 in) / 2,400.3 mm
Tractor Size Comparison Chart
Overall length comparison
This model
139 in
Average
125.2 in
Low
44.5 in
High
346.3 in
Overall width comparison
This model
54 in
Average
70 in
Low
20 in
High
176 in
Overall height comparison
This model
94.5 in
Average
79.8 in
Low
36 in
High
156 in
John Deere F710 Extra Dimension Notes
Storage fit note
The John Deere F710 can fit smaller farm storage setups if the opening is right. With length 139 in (11 ft 7 in) / 3,530.6 mm, width 54 in (4 ft 6 in) / 1,371.6 mm, and height 94.5 in (7 ft 10.5 in) / 2,400.3 mm, do not ignore cab/ROPS height.
Fitment note
For the John Deere F710, the main fitment numbers are length at 139 in (11 ft 7 in) / 3,530.6 mm, width at 54 in (4 ft 6 in) / 1,371.6 mm, and height at 94.5 in (7 ft 10.5 in) / 2,400.3 mm. These are the specs to check against a shed, trailer or gate.
Storage Tips
Use a tall garage, barn bay or small machinery shed as the first storage check for the John Deere F710.
Recommended storage clearance: target about 108 in (9 ft) clear height; target about 96 in (8 ft) clear width; target about 180 in (15 ft) bay depth.
Storage FAQ
Will it fit in a garage?
A garage may work only when the clear opening is larger than 94.5 in high and 54 in wide, and the bay is longer than 139 in. For this machine, use 9 ft high, 8 ft wide, and 15 ft deep as the better rule.
What size door should I check?
For this storage class, the safer number is 9 ft high, 8 ft wide, 15 ft deep. That keeps the doorway and bay ahead of the tractor’s actual 94.5 in height, 54 in width and 139 in length.
Do attachments change the storage size?
Yes. A tight bay should be planned around the attached setup. For this compact tractor, allow about 3 ft to 6 ft extra depth if gear stays on.
How much maneuvering room should I allow?
If an attachment stays on, base the turning room on the attached length, not just the captured 139 in tractor length.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
