For the John Deere F510, coolant capacity is 9.51 gal (36 L). Coolant choice is listed as John Deere Cool-Gard II, with 40/60 coolant and water mix guidance.
Coolant capacity9.51 gal (36 L)Cooling system refill amount
Antifreeze mix40/60 coolant and water mixFreeze/boil protection
John Deere F510 Coolant Capacity Specs
Coolant capacity
9.51 gal (36 L)
Coolant type
John Deere Cool-Gard II
Antifreeze mix
40/60 coolant and water mix
Engine horsepower
20 hp
Engine displacement
0.6 L (36.6 cu in)
John Deere F510 Coolant Capacity Guide
Coolant capacity guide
This model
9.51 gal
Class low
0.8 gal
Class typical
2.5 gal
Class high
5 gal
Compared with a broad older small tractor guide, not the full tractor dataset.
John Deere F510 Coolant Service Notes
Coolant capacity note
For the John Deere F510, the coolant capacity is 9.51 gal (36 L). That is the buying and refill guide for a full cooling-system service
Coolant service note
For a full coolant service on the John Deere F510, plan around 9.51 gal (36 L) and match the listed coolant guidance: John Deere Cool-Gard II and 40/60 coolant and water mix
Coolant type note
The John Deere F510 coolant type is John Deere Cool-Gard II. Wrong coolant chemistry can reduce corrosion, freeze and boil protection
Antifreeze mix note
The listed mix for the John Deere F510 is 40/60 coolant and water mix. Keep the coolant strength in range after a drain, flush or top-up
Refill check
After a drain and refill on the John Deere F510, the cooling system can burp air. Recheck the level after the first warm-up and cool-down cycle
Engine context
The John Deere F510 engine specs listed with this page are engine horsepower 20 hp and engine displacement 0.6 L (36.6 cu in). They help identify the machine, but they are not a substitute for the coolant capacity
John Deere F510 Coolant Capacity FAQ
How many litres of coolant does the John Deere F510 take?
Plan around 9.51 gal (36 L) when servicing coolant on the John Deere F510. Recheck the system when cool because air pockets can lower the level
What coolant chemistry should the John Deere F510 use?
Coolant type for the John Deere F510 is listed as John Deere Cool-Gard II. If the system has been filled with something else before, confirm compatibility before mixing
What coolant mix is listed for the John Deere F510?
The John Deere F510 coolant mix guidance is 40/60 coolant and water mix. Keep the mix consistent when topping up so freeze and boil protection stay in range
How do I avoid air pockets when refilling the John Deere F510 coolant?
Yes. Use the 9.51 gal (36 L) figure as the refill guide, but always recheck level after warm-up and cool-down because trapped air can move through the system
Should old coolant be drained from the John Deere F510?
If the John Deere F510 coolant is only slightly low and otherwise clean, topping up with compatible coolant can be enough. If condition is poor, drain and refill instead
Official information note
Mistakes do happen. Tractor coolant capacity and coolant type can change by year, market, engine, radiator setup and service procedure. Check the operator manual, service manual and official deere.com website before draining, flushing or refilling the cooling system.
