The John Deere F1145 tractor hydraulic pump flow is 5.6 GPM, and hydraulic system pressure is 2,900 psi.
Hydraulic pump flow5.6 GPM
Implement flow5.6 GPM
Total hydraulic flow5.6 GPM
Hydraulic pressure2,900 psi
Hydraulic system typeopen-center
Hydraulic fluid capacity4.5 gal
John Deere F1145 Hydraulic Flow Details
Hydraulic pump flow
5.6 GPM
Implement hydraulic flow
5.6 GPM
Total hydraulic flow
5.6 GPM
Hydraulic system pressure
2,900 psi
Hydraulic system type
open-center
Hydraulic fluid capacity
4.5 gal
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
5.6 GPM
Average
33.4 GPM
Low
2.5 GPM
High
78 GPM
Implement hydraulic flow comparison
This model
5.6 GPM
Average
32.8 GPM
Low
2.4 GPM
High
115 GPM
Total hydraulic flow comparison
This model
5.6 GPM
Average
33.6 GPM
Low
2.4 GPM
High
85 GPM
Hydraulic pressure comparison
This model
2,900 psi
Average
2,569.3 psi
Low
300 psi
High
3,046 psi
Hydraulic fluid capacity comparison
This model
4.5 gal
Average
26.1 gal
Low
0.6 gal
High
79.3 gal
John Deere F1145 Extra Hydraulic Notes
Hydraulic flow note
The John Deere F1145’s implement flow figure is about 5.6 GPM, so hydraulic attachment choice should be based on flow demand, not horsepower alone.
Hydraulic pressure note
The John Deere F1145’s hydraulic pressure is listed at 2,900 psi, which is strong tractor hydraulic pressure; flow still decides attachment speed while pressure affects force.
Rear remotes / SCV note
Rear remotes / SCVs are mentioned, but the exact count is not clearly confirmed in the scraped data.
For hydraulic implements, match the implement to the available hydraulic flow (5.6 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
The John Deere F1145’s hydraulic system type is open-center, which is simple and common on many compact and utility tractors.
Hydraulic fluid capacity note
For maintenance, the John Deere F1145’s hydraulic fluid capacity matters more than flow rate because it affects oil changes, filter service and refill quantity.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
