The John Deere E96 tractor tire size is front 16×6.50-8 and the rear is 16×16.50-8.
Front tire16×6.50-8
Rear tire16×16.50-8
Front/rear setupDifferent front and rear tire sizes
Tire pressure12 PSI, 14 PSI
Rim diameter8 in front/rear
John Deere E96 Tire Size Details
Front tire size
16×6.50-8
Rear tire size
16×16.50-8
Front/rear setup
Different front and rear tire sizes
Original factory tire size
Front 11×4.00-5, Rear 16×16.50-8
Replacement tire size
Front 27×8.50-15, Rear 27×12-15
R1 ag tire size
12.4-24, 8-16
Front tire construction
Flotation/implement tire
Rear tire construction
Flotation/implement tire
Front section width
6.5 in
Rear section width
16.5 in
Front rim diameter
8 in
Rear rim diameter
8 in
Approx front overall diameter
about 16 in
Approx rear overall diameter
about 16 in
Tire pressure
12 PSI, 14 PSI
Tire Size Comparison Chart
Front rim diameter comparison
This model
8 in
Average
17.1 in
Low
4 in
High
50 in
Rear rim diameter comparison
This model
8 in
Average
25.5 in
Low
0 in
High
50 in
John Deere E96 Extra Tire Notes
Tire size note
The John Deere E96 uses different front and rear tire sizes in this data: front 16×6.50-8 (8 in rim, 6.5 in width) and rear 16×16.50-8 (8 in rim, 16.5 in width)
Pressure note
For the John Deere E96 with front 16×6.50-8 and rear 16×16.50-8 tires, the pressure values captured in the answer are 12 PSI, 14 PSI. Tire pressure is load-dependent, so use this as a reference value rather than a universal setting
Front/rear matching note
The John Deere E96 data shows front 16×6.50-8 and rear 16×16.50-8. When changing either size, front/rear rolling circumference and lead/lag need to stay within the correct range
Official information note
Mistakes do happen. Tire sizes can change by year, axle, wheel/rim option, tyre brand, tread type and local market. Please check the tire sidewall, operator manual and official deere.com website for official information.
