The John Deere AWD tractor hydraulic pump flow is 85 GPM, and hydraulic system pressure is 2,900 psi.
Hydraulic pump flow85 GPM
Implement flow17.1 GPM
Total hydraulic flow48 GPM
Hydraulic pressure2,900 psi
Hydraulic system typeclosed-center pressure-flow compensated
Hydraulic fluid capacity13.2 gal
John Deere AWD Hydraulic Flow Details
Hydraulic pump flow
85 GPM
Implement hydraulic flow
17.1 GPM
Total hydraulic flow
48 GPM
Hydraulic system pressure
2,900 psi
Hydraulic system type
closed-center pressure-flow compensated
Hydraulic fluid capacity
13.2 gal
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
85 GPM
Average
13.4 GPM
Low
0.9 GPM
High
85 GPM
Implement hydraulic flow comparison
This model
17.1 GPM
Average
11.1 GPM
Low
0.9 GPM
High
78 GPM
Total hydraulic flow comparison
This model
48 GPM
Average
13 GPM
Low
0.9 GPM
High
78 GPM
Hydraulic pressure comparison
This model
2,900 psi
Average
1,813.3 psi
Low
300 psi
High
3,000 psi
Hydraulic fluid capacity comparison
This model
13.2 gal
Average
3.6 gal
Low
0.5 gal
High
60 gal
John Deere AWD Extra Hydraulic Notes
Hydraulic flow note
The John Deere AWD’s total flow is higher than implement flow, so use the implement-flow number when matching hydraulic tools and SCV-driven equipment.
Hydraulic pressure note
Hydraulic pressure on the John Deere AWD is 2,900 psi, but hydraulic performance depends on pressure and flow together.
Rear remotes / SCV note
Rear remotes / SCVs depend on the tractor’s hydraulic package and options.
For hydraulic implements, match the implement to the available hydraulic flow (17.1 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
The John Deere AWD’s hydraulic system type is closed-center pressure-flow compensated, which is more advanced and better suited to variable hydraulic demand.
Hydraulic fluid capacity note
Hydraulic fluid capacity on the John Deere AWD is 13.2 gal, but the correct oil type and fill/check procedure should still come from the official manual.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
