The John Deere 9RX 710 is 144 in wide and 146.3 in tall.
Width144 in (12 ft 0 in) / 3,657.6 mm
Height146.3 in (12 ft 2.3 in) / 3,716 mm
John Deere 9RX 710 Dimensions
Overall width
144 in (12 ft 0 in) / 3,657.6 mm
Overall height
146.3 in (12 ft 2.3 in) / 3,716 mm
Rear tread width
120 in (10 ft 0 in) / 3,048 mm
Tractor Size Comparison Chart
Overall width comparison
This model
144 in
Average
64.6 in
Low
20 in
High
144 in
Overall height comparison
This model
146.3 in
Average
86.2 in
Low
39.8 in
High
152 in
John Deere 9RX 710 Extra Dimension Notes
Storage fit note
The John Deere 9RX 710 is a serious storage job. With width 144 in (12 ft 0 in) / 3,657.6 mm and height 146.3 in (12 ft 2.3 in) / 3,716 mm, plan around large farm-shed access, not garage-style storage.
Fitment note
The John Deere 9RX 710 has captured dimensions of width at 144 in (12 ft 0 in) / 3,657.6 mm and height at 146.3 in (12 ft 2.3 in) / 3,716 mm. Use them before assuming it will fit through tight access.
Tread width note
The captured tread data for the John Deere 9RX 710 gives rear tread only: 120 in (10 ft 0 in) / 3,048 mm.
Storage Tips
Plan storage for the John Deere 9RX 710 like a big field tractor, not a compact utility machine.
A straight approach into the bay matters more as tractor width and wheelbase increase.
For this class, doorway width and attachment clearance are major planning numbers.
Overhead clearance should be measured at the lowest part of the doorway, not the tallest part of the shed.
Storage FAQ
Will it fit in a garage?
If your garage door is close to 146.3 in tall or 144 in wide, count it as too tight. The safer check for the John Deere 9RX 710 is around 16 ft high and 16 ft wide.
What size door should I check?
Use 16 ft high and 16 ft wide as the door-and-bay target. That is based on the tractor’s 146.3 in height, 144 in width and length not captured length, plus working clearance.
Do attachments change the storage size?
Yes. Keep the bare dimensions in mind: length not captured long, 144 in wide and 146.3 in tall. Then add attachment overhang, folded ROPS/cab height and mower or tire width.
How much maneuvering room should I allow?
A straight run into the bay is the cleanest setup. For a length not captured long tractor, about a clear straight approach before the doorway outside the door is a better benchmark than squeezing in from a tight turn.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
