The John Deere 9470RT tractor hydraulic pump flow is 58 GPM, and hydraulic system pressure is 2,900 psi.
Hydraulic pump flow58 GPM
Implement flow115 GPM
Total hydraulic flow58 GPM
Hydraulic pressure2,900 psi
Hydraulic system typeclosed-center
Hydraulic fluid capacity50.7 qt (12.7 gal)
John Deere 9470RT Hydraulic Flow Details
Hydraulic pump flow
58 GPM
Implement hydraulic flow
115 GPM
Total hydraulic flow
58 GPM
Hydraulic system pressure
2,900 psi
Hydraulic system type
closed-center
Hydraulic fluid capacity
50.7 qt (12.7 gal)
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
58 GPM
Average
33.4 GPM
Low
2.5 GPM
High
78 GPM
Implement hydraulic flow comparison
This model
115 GPM
Average
32.8 GPM
Low
2.4 GPM
High
115 GPM
Total hydraulic flow comparison
This model
58 GPM
Average
33.6 GPM
Low
2.4 GPM
High
85 GPM
Hydraulic pressure comparison
This model
2,900 psi
Average
2,569.3 psi
Low
300 psi
High
3,046 psi
Hydraulic fluid capacity comparison
This model
12.7 gal
Average
26.1 gal
Low
0.6 gal
High
79.3 gal
John Deere 9470RT Extra Hydraulic Notes
Hydraulic flow note
With about 115 GPM implement flow, the John Deere 9470RT sits in the very high-flow hydraulic range and is best suited to large hydraulic implements and high-demand farm equipment where SCV flow matters.
Hydraulic pressure note
Hydraulic pressure on the John Deere 9470RT is 2,900 psi, but hydraulic performance depends on pressure and flow together.
For hydraulic implements, match the implement to the available hydraulic flow (115 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
The John Deere 9470RT’s hydraulic system type is closed-center, which is built for higher-pressure hydraulic control than a basic open-center setup.
Hydraulic fluid capacity note
Hydraulic fluid capacity on the John Deere 9470RT is 50.7 qt (12.7 gal), but the correct oil type and fill/check procedure should still come from the official manual.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
