The John Deere 9470R takes 16.78 gal (63.5 L) of coolant. Use coolant compatible with John Deere Cool-Gard II and follow the listed The recommended coolant type for the John Deere 9370R tractor is John Deere Cool-Gard II guidance.
Coolant capacity16.78 gal (63.5 L)Cooling system refill amount
Antifreeze mixThe recommended coolant type for the John Deere 9370R tractor is John Deere Cool-Gard IIFreeze/boil protection
John Deere 9470R Coolant Capacity Specs
Coolant capacity
16.78 gal (63.5 L)
Coolant type
John Deere Cool-Gard II
Antifreeze mix
The recommended coolant type for the John Deere 9370R tractor is John Deere Cool-Gard II
Engine horsepower
470 hp
Engine displacement
826.7 cu in (13.55 L)
John Deere 9470R Coolant Capacity Guide
Coolant capacity guide
This model
16.78 gal
Class low
15 gal
Class typical
28 gal
Class high
45 gal
Compared with a broad 9 series guide, not the full tractor dataset.
John Deere 9470R Coolant Service Notes
Coolant capacity note
The main coolant number for the John Deere 9470R is 16.78 gal (63.5 L). Use it as the cooling-system refill amount, then check the radiator or overflow level after the engine has warmed up and cooled down
Coolant service note
The John Deere 9470R cooling system should be refilled close to 16.78 gal (63.5 L), with coolant choice guided by John Deere Cool-Gard II and The recommended coolant type for the John Deere 9370R tractor is John Deere Cool-Gard II
Coolant type note
Coolant type matters on the John Deere 9470R. The listed type is John Deere Cool-Gard II, so avoid mixing random antifreeze unless compatibility is clear
Antifreeze mix note
For the John Deere 9470R, the antifreeze mix is listed as The recommended coolant type for the John Deere 9370R tractor is John Deere Cool-Gard II. Use the correct mix rather than topping up repeatedly with plain water
Refill check
Use the 16.78 gal (63.5 L) capacity to buy enough coolant for the John Deere 9470R, but finish the job by checking the actual level marks
Engine context
For comparison, the John Deere 9470R engine details listed here are engine horsepower 470 hp and engine displacement 826.7 cu in (13.55 L). The coolant capacity remains the service number to use for refilling
John Deere 9470R Coolant Capacity FAQ
What is the full coolant refill capacity for the John Deere 9470R?
The John Deere 9470R takes 16.78 gal (63.5 L) of coolant. Final level can settle after trapped air leaves the cooling system
What coolant should I put in the John Deere 9470R?
The John Deere 9470R coolant spec points to John Deere Cool-Gard II. That matters because the wrong coolant can reduce corrosion and cavitation protection
What coolant and water mix is used in the John Deere 9470R?
The John Deere 9470R uses The recommended coolant type for the John Deere 9370R tractor is John Deere Cool-Gard II where that mix is specified. Confirm the mix against your climate and manual
Should the John Deere 9470R coolant be checked hot or cold?
After a coolant change on the John Deere 9470R, check for leaks, watch temperature and recheck the level once the engine cools down
What signs mean the John Deere 9470R coolant should be flushed?
Low level, bad smell, rust, sludge, oil film or overheating are signs to inspect the John Deere 9470R cooling system rather than only topping it up
Official information note
Mistakes do happen. Tractor coolant capacity and coolant type can change by year, market, engine, radiator setup and service procedure. Check the operator manual, service manual and official deere.com website before draining, flushing or refilling the cooling system.
