The John Deere 9300T is 115.5 in wide and 135.5 in tall, with a 111 in wheelbase.
Width115.5 in (9 ft 7.5 in) / 2,933.7 mm
Height135.5 in (11 ft 3.5 in) / 3,441.7 mm
Wheelbase111 in (9 ft 3 in) / 2,819.4 mm
Ground clearance28.8 in (2 ft 4.8 in) / 731.5 mm
John Deere 9300T Dimensions
Overall width
115.5 in (9 ft 7.5 in) / 2,933.7 mm
Overall height
135.5 in (11 ft 3.5 in) / 3,441.7 mm
Wheelbase
111 in (9 ft 3 in) / 2,819.4 mm
Ground clearance
28.8 in (2 ft 4.8 in) / 731.5 mm
Tractor Size Comparison Chart
Overall width comparison
This model
115.5 in
Average
70 in
Low
20 in
High
176 in
Overall height comparison
This model
135.5 in
Average
79.8 in
Low
36 in
High
156 in
Wheelbase comparison
This model
111 in
Average
82.8 in
Low
34.8 in
High
190.5 in
Ground clearance comparison
This model
28.8 in
Average
16.3 in
Low
3.5 in
High
65.4 in
John Deere 9300T Extra Dimension Notes
Wheelbase note
The John Deere 9300T wheelbase reads 111 in (9 ft 3 in) / 2,819.4 mm. Use it as a comparison number across similar tractors.
Ground clearance note
The clearance number for the John Deere 9300T is 28.8 in (2 ft 4.8 in) / 731.5 mm. This helps separate field-ready sizing from simple storage dimensions.
Storage Tips
Leave generous room for approach angle, turning room and attachment length.
Big tractors need service room around them, not just enough space to squeeze inside.
A 111 in wheelbase means the approach into the storage bay matters, not just the doorway width.
A 10 ft or 12 ft class doorway may be needed depending on the exact cab/ROPS setup.
Storage FAQ
Will it fit in a garage?
Because the John Deere 9300T is 135.5 in tall and 115.5 in wide, door track height and side posts matter. Because it is length not captured long, the bay also needs about the tractor length plus attachment room of usable depth.
What size door should I check?
The clean check is 15 ft high, 14 ft wide and the tractor length plus attachment room deep. That gives margin over the listed 135.5 in height, 115.5 in width and length not captured length.
Do attachments change the storage size?
Yes. Check attachments against all three numbers: 135.5 in for overhead clearance, 115.5 in for side clearance and length not captured for bay depth.
How much maneuvering room should I allow?
Use the 111 in wheelbase plus the length not captured length together. The tractor may clear the doorway but still need space to swing the front or rear around.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
