For the John Deere 8310, coolant capacity is 9.34 gal (35.3 L). Use coolant compatible with the listed in the radiator and the engine The coolant capacity for the John Deere 8310R tractor is type.
Coolant capacity9.34 gal (35.3 L)Cooling system refill amount
Coolant typein the radiator and the engine The coolant capacity for the John Deere 8310R tractor isMatch coolant chemistry
John Deere 8310 Coolant Capacity Specs
Coolant capacity
9.34 gal (35.3 L)
Coolant type
in the radiator and the engine The coolant capacity for the John Deere 8310R tractor is
John Deere 8310 Coolant Capacity Guide
Coolant capacity guide
This model
9.33 gal
Class low
10 gal
Class typical
16 gal
Class high
24 gal
Compared with a broad 8 series guide, not the full tractor dataset.
John Deere 8310 Coolant Service Notes
Coolant capacity note
The main coolant number for the John Deere 8310 is 9.34 gal (35.3 L). Use it as the cooling-system refill amount, then check the radiator or overflow level after the engine has warmed up and cooled down
Coolant service note
For a full coolant service on the John Deere 8310, plan around 9.34 gal (35.3 L) and match the listed coolant guidance: in the radiator and the engine The coolant capacity for the John Deere 8310R tractor is
Coolant type note
The John Deere 8310 coolant type is in the radiator and the engine The coolant capacity for the John Deere 8310R tractor is. Wrong coolant chemistry can reduce corrosion, freeze and boil protection
Refill check
After a drain and refill on the John Deere 8310, the cooling system can burp air. Recheck the level after the first warm-up and cool-down cycle
John Deere 8310 Coolant Capacity FAQ
What is the full coolant refill capacity for the John Deere 8310?
Plan around 9.34 gal (35.3 L) when servicing coolant on the John Deere 8310. Recheck the system when cool because air pockets can lower the level
What coolant should I put in the John Deere 8310?
Coolant type for the John Deere 8310 is listed as in the radiator and the engine The coolant capacity for the John Deere 8310R tractor is. If the system has been filled with something else before, confirm compatibility before mixing
Should the John Deere 8310 coolant be checked hot or cold?
Yes. Use the 9.34 gal (35.3 L) figure as the refill guide, but always recheck level after warm-up and cool-down because trapped air can move through the system
What signs mean the John Deere 8310 coolant should be flushed?
If the John Deere 8310 coolant is only slightly low and otherwise clean, topping up with compatible coolant can be enough. If condition is poor, drain and refill instead
Can I mix different coolant brands in the John Deere 8310?
Match coolant by specification, not just color. For the John Deere 8310, the listed coolant guidance is in the radiator and the engine The coolant capacity for the John Deere 8310R tractor is. If compatibility is unclear, flush and refill rather than mixing types
Official information note
Mistakes do happen. Tractor coolant capacity and coolant type can change by year, market, engine, radiator setup and service procedure. Check the operator manual, service manual and official deere.com website before draining, flushing or refilling the cooling system.
