The John Deere 8110T takes 9 gal (34 L) of coolant. Use coolant compatible with John Deere Cool-Gard II and follow the listed For the John Deere 8110T tractor, the recommended coolant is John Deere COOL-GARD II guidance.
Coolant capacity9 gal (34 L)Cooling system refill amount
Antifreeze mixFor the John Deere 8110T tractor, the recommended coolant is John Deere COOL-GARD IIFreeze/boil protection
John Deere 8110T Coolant Capacity Specs
Coolant capacity
9 gal (34 L)
Coolant type
John Deere Cool-Gard II
Antifreeze mix
For the John Deere 8110T tractor, the recommended coolant is John Deere COOL-GARD II
John Deere 8110T Coolant Capacity Guide
Coolant capacity guide
This model
9 gal
Class low
10 gal
Class typical
16 gal
Class high
24 gal
Compared with a broad 8 series guide, not the full tractor dataset.
John Deere 8110T Coolant Service Notes
Coolant capacity note
The John Deere 8110T cooling system is listed at 9 gal (34 L). Final level can settle after the first heat cycle, so recheck the level after service
Coolant service note
The John Deere 8110T cooling system should be refilled close to 9 gal (34 L), with coolant choice guided by John Deere Cool-Gard II and For the John Deere 8110T tractor, the recommended coolant is John Deere COOL-GARD II
Coolant type note
Coolant type matters on the John Deere 8110T. The listed type is John Deere Cool-Gard II, so avoid mixing random antifreeze unless compatibility is clear
Antifreeze mix note
For the John Deere 8110T, the antifreeze mix is listed as For the John Deere 8110T tractor, the recommended coolant is John Deere COOL-GARD II. Use the correct mix rather than topping up repeatedly with plain water
Refill check
Use the 9 gal (34 L) capacity to buy enough coolant for the John Deere 8110T, but finish the job by checking the actual level marks
John Deere 8110T Coolant Capacity FAQ
How much coolant does the John Deere 8110T take?
The John Deere 8110T takes 9 gal (34 L) of coolant. Final level can settle after trapped air leaves the cooling system
Does the John Deere 8110T use John Deere Cool-Gard coolant?
The John Deere 8110T coolant spec points to John Deere Cool-Gard II. That matters because the wrong coolant can reduce corrosion and cavitation protection
What coolant and water mix is used in the John Deere 8110T?
The John Deere 8110T antifreeze guidance is For the John Deere 8110T tractor, the recommended coolant is John Deere COOL-GARD II. Check the coolant label before mixing concentrate and water
Do I need to recheck coolant level after servicing the John Deere 8110T?
After a coolant change on the John Deere 8110T, check for leaks, watch temperature and recheck the level once the engine cools down
When should contaminated coolant be replaced in the John Deere 8110T?
Low level, bad smell, rust, sludge, oil film or overheating are signs to inspect the John Deere 8110T cooling system rather than only topping it up
Official information note
Mistakes do happen. Tractor coolant capacity and coolant type can change by year, market, engine, radiator setup and service procedure. Check the operator manual, service manual and official deere.com website before draining, flushing or refilling the cooling system.
