The John Deere 8100 tractor hydraulic pump flow is 30 GPM, and hydraulic system pressure is 2,900 psi.
Hydraulic pump flow30 GPM
Implement flow30 GPM
Total hydraulic flow30 GPM
Hydraulic pressure2,900 psi
Hydraulic system typeopen-center
Hydraulic fluid capacity148 qt (37 gal)
John Deere 8100 Hydraulic Flow Details
Hydraulic pump flow
30 GPM
Implement hydraulic flow
30 GPM
Total hydraulic flow
30 GPM
Hydraulic system pressure
2,900 psi
Hydraulic system type
open-center
Hydraulic fluid capacity
148 qt (37 gal)
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
30 GPM
Average
33.4 GPM
Low
2.5 GPM
High
78 GPM
Implement hydraulic flow comparison
This model
30 GPM
Average
32.8 GPM
Low
2.4 GPM
High
115 GPM
Total hydraulic flow comparison
This model
30 GPM
Average
33.6 GPM
Low
2.4 GPM
High
85 GPM
Hydraulic pressure comparison
This model
2,900 psi
Average
2,569.3 psi
Low
300 psi
High
3,046 psi
Hydraulic fluid capacity comparison
This model
37 gal
Average
26.1 gal
Low
0.6 gal
High
79.3 gal
John Deere 8100 Extra Hydraulic Notes
Hydraulic flow note
The John Deere 8100’s implement flow figure is about 30 GPM, so hydraulic attachment choice should be based on flow demand, not horsepower alone.
Hydraulic pressure note
Hydraulic pressure on the John Deere 8100 is 2,900 psi, but hydraulic performance depends on pressure and flow together.
Rear remotes / SCV note
Rear remotes / SCVs are mentioned, but the exact count is not clearly confirmed in the scraped data.
For hydraulic implements, match the implement to the available hydraulic flow (30 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
System type matters on the John Deere 8100: open-center affects how hydraulic flow and pressure are delivered to valves and implements.
Hydraulic fluid capacity note
Hydraulic fluid capacity on the John Deere 8100 is 148 qt (37 gal), but the correct oil type and fill/check procedure should still come from the official manual.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
