The John Deere 7610 tractor hydraulic pump flow is 18.2 GPM, and hydraulic system pressure is 2,500 psi.
Hydraulic pump flow18.2 GPM
Implement flow18.2 GPM
Total hydraulic flow26 GPM
Hydraulic pressure2,500 psi
Hydraulic system typeopen-center
John Deere 7610 Hydraulic Flow Details
Hydraulic pump flow
18.2 GPM
Implement hydraulic flow
18.2 GPM
Total hydraulic flow
26 GPM
Hydraulic system pressure
2,500 psi
Hydraulic system type
open-center
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
18.2 GPM
Average
33.4 GPM
Low
2.5 GPM
High
78 GPM
Implement hydraulic flow comparison
This model
18.2 GPM
Average
32.8 GPM
Low
2.4 GPM
High
115 GPM
Total hydraulic flow comparison
This model
26 GPM
Average
33.6 GPM
Low
2.4 GPM
High
85 GPM
Hydraulic pressure comparison
This model
2,500 psi
Average
2,569.3 psi
Low
300 psi
High
3,046 psi
John Deere 7610 Extra Hydraulic Notes
Hydraulic flow note
For attachments, the John Deere 7610’s implement hydraulic flow matters more than total flow. The listed gap is about 7.8 GPM between implement flow and total flow.
Hydraulic pressure note
At 2,500 psi, the John Deere 7610’s hydraulic system pressure matters most for lift force, cylinder force and loader response.
Rear remotes / SCV note
Rear remotes / SCVs depend on the tractor’s hydraulic package and options.
For hydraulic implements, match the implement to the available hydraulic flow (18.2 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
The John Deere 7610 uses a open-center hydraulic setup, so compatibility depends on both the attachment and valve configuration.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
