The John Deere 717 is 75 in long, 48 in wide, and 71.8 in tall.
Length75 in (6 ft 3 in) / 1,905 mm
Width48 in (4 ft 0 in) / 1,219.2 mm
Height71.8 in (5 ft 11.8 in) / 1,823.7 mm
John Deere 717 Dimensions
Overall length
75 in (6 ft 3 in) / 1,905 mm
Overall width
48 in (4 ft 0 in) / 1,219.2 mm
Overall height
71.8 in (5 ft 11.8 in) / 1,823.7 mm
Tractor Size Comparison Chart
Overall length comparison
This model
75 in
Average
125.2 in
Low
44.5 in
High
346.3 in
Overall width comparison
This model
48 in
Average
70 in
Low
20 in
High
176 in
Overall height comparison
This model
71.8 in
Average
79.8 in
Low
36 in
High
156 in
John Deere 717 Extra Dimension Notes
Size class note
The John Deere 717 size class is small compact tractor for practical planning. It is sized more for acreage, yard work, loader jobs and tight property access than large field work.
Storage fit note
The John Deere 717 may be garage-friendly in some setups, but only after checking the actual door height and width. With length 75 in (6 ft 3 in) / 1,905 mm, width 48 in (4 ft 0 in) / 1,219.2 mm, and height 71.8 in (5 ft 11.8 in) / 1,823.7 mm, measure before assuming fit.
Fitment note
The John Deere 717 fitment numbers are length at 75 in (6 ft 3 in) / 1,905 mm, width at 48 in (4 ft 0 in) / 1,219.2 mm, and height at 71.8 in (5 ft 11.8 in) / 1,823.7 mm. These decide whether it is garage-like, shed-like or machinery-shed size.
Storage Tips
Garage-style storage may work, but judge it against a clear opening around 7 ft high, 8 ft wide, and 15 ft deep, not the exact tractor dimensions.
Use the bare dimensions only as a starting point; a practical storage target is a clear opening around 7 ft high, 8 ft wide, and 15 ft deep.
Small tractor storage is usually about door height first, then attachment depth.
Storage FAQ
Will it fit in a garage?
If your garage door is close to 71.8 in tall or 48 in wide, count it as too tight. The safer check for the John Deere 717 is around 7 ft high, 8 ft wide, and 15 ft deep.
What size door should I check?
The clean check is 7 ft high, 8 ft wide and 15 ft deep. That gives margin over the listed 71.8 in height, 48 in width and 75 in length.
Do attachments change the storage size?
Yes. Check attachments against all three numbers: 71.8 in for overhead clearance, 48 in for side clearance and 75 in for bay depth.
How much maneuvering room should I allow?
Use the 75 in length as the maneuvering clue here. A bay around 15 ft deep still needs approach room outside the shed, especially if implements stay fitted.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
