The John Deere 6R 140 is 206.2 in long, 80.3 in wide, and 129.9 in tall, with a 100.4 in wheelbase.
Length206.2 in (17 ft 2.2 in) / 5,237.5 mm
Width80.3 in (6 ft 8.3 in) / 2,039.6 mm
Height129.9 in (10 ft 9.9 in) / 3,299.5 mm
Wheelbase100.4 in (8 ft 4.4 in) / 2,550.2 mm
Ground clearance16.5 in (1 ft 4.5 in) / 419.1 mm
John Deere 6R 140 Dimensions
Overall length
206.2 in (17 ft 2.2 in) / 5,237.5 mm
Overall width
80.3 in (6 ft 8.3 in) / 2,039.6 mm
Overall height
129.9 in (10 ft 9.9 in) / 3,299.5 mm
Wheelbase
100.4 in (8 ft 4.4 in) / 2,550.2 mm
Ground clearance
16.5 in (1 ft 4.5 in) / 419.1 mm
Tractor Size Comparison Chart
Overall length comparison
This model
206.2 in
Average
138.9 in
Low
63 in
High
346.3 in
Overall width comparison
This model
80.3 in
Average
64.6 in
Low
20 in
High
144 in
Overall height comparison
This model
129.9 in
Average
86.2 in
Low
39.8 in
High
152 in
Wheelbase comparison
This model
100.4 in
Average
79.2 in
Low
34.8 in
High
190.5 in
Ground clearance comparison
This model
16.5 in
Average
16.4 in
Low
3.5 in
High
65.4 in
John Deere 6R 140 Extra Dimension Notes
Size class note
The John Deere 6R 140 is best classified as a large farm tractor from the dimensions captured. It is a large farm tractor, so shed height, gate width, trailer space and implement room matter more than they would on a compact machine.
Wheelbase note
The John Deere 6R 140 wheelbase comes in at 100.4 in (8 ft 4.4 in) / 2,550.2 mm. That affects balance more than simple length alone.
Ground clearance note
The John Deere 6R 140 clearance number is 16.5 in (1 ft 4.5 in) / 419.1 mm. Use it when assessing row and underbody clearance.
Storage Tips
A farm shed or machinery bay is the sensible storage target for the John Deere 6R 140.
Leave walking room around the parked tractor if you need to service, refuel or connect implements indoors.
For this class, use wide-door shed planning and allow room for implements.
Wheelbase is 100.4 in, so leave room to line it up cleanly rather than forcing it through a tight angle.
For taller tractors, a door that looks close is not good enough – measure it.
Storage FAQ
Will it fit in a garage?
A garage may work only when the clear opening is larger than 129.9 in high and 80.3 in wide, and the bay is longer than 206.2 in. For this machine, use 14 ft high, 10 ft wide, and 24 ft deep as the better rule.
What size door should I check?
If there are posts, tracks or stored gear near the doorway, go bigger than 14 ft by 10 ft. The tractor’s base size is 206.2 in long and 80.3 in wide before attachments.
Do attachments change the storage size?
Yes. Measure the tractor in storage trim: highest point compared with 129.9 in, widest point compared with 80.3 in, and longest parked length compared with 206.2 in.
How much maneuvering room should I allow?
If you cannot approach straight, go wider than 10 ft. With 80.3 in tractor width and a 100.4 in wheelbase, angled entries need extra side margin.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
