The John Deere 6R 110 takes 3.1 gal (11.7 L) of coolant. Use coolant compatible with John Deere Cool-Gard II and follow the listed 50/50 coolant and water mix guidance.
John Deere 6R 110 Coolant Capacity Specs
| Coolant capacity | 3.1 gal (11.7 L) |
|---|---|
| Coolant type | John Deere Cool-Gard II |
| Antifreeze mix | 50/50 coolant and water mix |
| Engine horsepower | 108.6 hp |
| Engine displacement | 274.6 cu in (4.5 L) |
John Deere 6R 110 Coolant Capacity Guide
Coolant capacity guide
Compared with a broad 6 series guide, not the full tractor dataset.
John Deere 6R 110 Coolant Service Notes
| Coolant capacity note | The main coolant number for the John Deere 6R 110 is 3.1 gal (11.7 L). Use it as the cooling-system refill amount, then check the radiator or overflow level after the engine has warmed up and cooled down |
|---|---|
| Coolant service note | The John Deere 6R 110 cooling system should be refilled close to 3.1 gal (11.7 L), with coolant choice guided by John Deere Cool-Gard II and 50/50 coolant and water mix |
| Coolant type note | Coolant type matters on the John Deere 6R 110. The listed type is John Deere Cool-Gard II, so avoid mixing random antifreeze unless compatibility is clear |
| Antifreeze mix note | For the John Deere 6R 110, the antifreeze mix is listed as 50/50 coolant and water mix. Use the correct mix rather than topping up repeatedly with plain water |
| Refill check | Use the 3.1 gal (11.7 L) capacity to buy enough coolant for the John Deere 6R 110, but finish the job by checking the actual level marks |
| Engine context | The engine context for the John Deere 6R 110 is engine horsepower 108.6 hp and engine displacement 274.6 cu in (4.5 L). Use this for comparison only; the refill amount is the coolant capacity above |
John Deere 6R 110 Coolant Capacity FAQ
What is the full coolant refill capacity for the John Deere 6R 110?
Use 3.1 gal (11.7 L) as the coolant-change amount for the John Deere 6R 110. The final level should still be checked at the radiator or overflow bottle
What coolant should I put in the John Deere 6R 110?
Use coolant compatible with John Deere Cool-Gard II for the John Deere 6R 110. Capacity tells you how much; coolant type tells you what to use
What antifreeze ratio is listed for the John Deere 6R 110?
The John Deere 6R 110 antifreeze guidance is 50/50 coolant and water mix. Check the coolant label before mixing concentrate and water
Should the John Deere 6R 110 coolant be checked hot or cold?
The 3.1 gal (11.7 L) number helps you plan the refill. The actual finish point is the correct level mark after warm-up, cool-down and leak checking
What signs mean the John Deere 6R 110 coolant should be flushed?
For the John Deere 6R 110, use the 3.1 gal (11.7 L) capacity when planning a full drain or flush. Topping up only solves low level, not worn-out coolant
Mistakes do happen. Tractor coolant capacity and coolant type can change by year, market, engine, radiator setup and service procedure. Check the operator manual, service manual and official deere.com website before draining, flushing or refilling the cooling system.
