The John Deere 6M 125 tractor hydraulic pump flow is 21 GPM, and hydraulic system pressure is 3,000 psi.
Hydraulic pump flow21 GPM
Implement flow21 GPM
Total hydraulic flow21 GPM
Hydraulic pressure3,000 psi
Hydraulic system typeopen-center
Hydraulic fluid capacity13.7 gal
John Deere 6M 125 Hydraulic Flow Details
Hydraulic pump flow
21 GPM
Implement hydraulic flow
21 GPM
Total hydraulic flow
21 GPM
Hydraulic system pressure
3,000 psi
Hydraulic system type
open-center
Hydraulic fluid capacity
13.7 gal
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
21 GPM
Average
37.8 GPM
Low
3.3 GPM
High
85 GPM
Implement hydraulic flow comparison
This model
21 GPM
Average
37.9 GPM
Low
3.3 GPM
High
110 GPM
Total hydraulic flow comparison
This model
21 GPM
Average
38.2 GPM
Low
3.3 GPM
High
85 GPM
Hydraulic pressure comparison
This model
3,000 psi
Average
2,672.7 psi
Low
610 psi
High
3,625 psi
Hydraulic fluid capacity comparison
This model
13.7 gal
Average
28.5 gal
Low
0.9 gal
High
84 gal
John Deere 6M 125 Extra Hydraulic Notes
Hydraulic flow note
For hydraulic work, the key number on the John Deere 6M 125 is 21 GPM implement flow; that points toward larger loaders, rear remotes and more demanding implements, depending on pressure and valve setup.
Hydraulic pressure note
At 3,000 psi, the John Deere 6M 125’s hydraulic system pressure matters most for lift force, cylinder force and loader response.
Rear remotes / SCV note
Rear remotes / SCVs depend on the tractor’s hydraulic package and options.
For hydraulic implements, match the implement to the available hydraulic flow (21 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
The John Deere 6M 125 uses a open-center hydraulic setup, so compatibility depends on both the attachment and valve configuration.
Hydraulic fluid capacity note
For maintenance, the John Deere 6M 125’s hydraulic fluid capacity matters more than flow rate because it affects oil changes, filter service and refill quantity.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
