The John Deere 6520L is 62.2 in wide, with a 104.3 in wheelbase.
Width62.2 in (5 ft 2.2 in) / 1,579.9 mm
Wheelbase104.3 in (8 ft 8.3 in) / 2,649.2 mm
Ground clearance21 in (1 ft 9 in) / 533.4 mm
John Deere 6520L Dimensions
Overall width
62.2 in (5 ft 2.2 in) / 1,579.9 mm
Wheelbase
104.3 in (8 ft 8.3 in) / 2,649.2 mm
Ground clearance
21 in (1 ft 9 in) / 533.4 mm
Rear tread width
62.2 in (5 ft 2.2 in) / 1,579.9 mm
Tractor Size Comparison Chart
Overall width comparison
This model
62.2 in
Average
70 in
Low
20 in
High
176 in
Wheelbase comparison
This model
104.3 in
Average
82.8 in
Low
34.8 in
High
190.5 in
Ground clearance comparison
This model
21 in
Average
16.3 in
Low
3.5 in
High
65.4 in
John Deere 6520L Extra Dimension Notes
Fitment note
The John Deere 6520L is best judged by width at 62.2 in (5 ft 2.2 in) / 1,579.9 mm. The biggest issue is usually width or height, not just floor length.
Wheelbase note
The John Deere 6520L gives a wheelbase figure of 104.3 in (8 ft 8.3 in) / 2,649.2 mm. That helps describe the tractor’s stance.
Ground clearance note
The John Deere 6520L ground clearance spec is 21 in (1 ft 9 in) / 533.4 mm. It helps decide how forgiving the tractor is on uneven ground.
Tread width note
The captured tread data for the John Deere 6520L gives rear tread only: 62.2 in (5 ft 2.2 in) / 1,579.9 mm.
Storage Tips
Floor space is not enough; check the door height, side clearance and attachment length.
For this class, doorway width and attachment clearance are major planning numbers.
Use the 104.3 in wheelbase as a clue for how much approach room is needed near the shed entrance.
Storage FAQ
Will it fit in a garage?
At 62.2 in wide and 104.3 in wheelbase, a garage may work only if the door and bay are bigger than the tractor, not just equal to it. Use about 10 ft wide before counting attachments.
What size door should I check?
For this storage class, the safer number is 10 ft wide. That keeps the doorway and bay ahead of the tractor’s actual height not captured height, 62.2 in width and length not captured length.
Do attachments change the storage size?
Yes. The published length not captured length is useful for the bare tractor, but the real storage number is the longest point from front attachment to rear attachment.
How much maneuvering room should I allow?
Use the 104.3 in wheelbase as the handling clue. If the approach is angled, a 10 ft door may still feel tight, so leave about 20 ft to straighten up.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
