The John Deere 6425 is 168.2 in long, 87.2 in wide, and 108.9 in tall.
Length168.2 in (14 ft 0.2 in) / 4,272.3 mm
Width87.2 in (7 ft 3.2 in) / 2,214.9 mm
Height108.9 in (9 ft 0.9 in) / 2,766.1 mm
John Deere 6425 Dimensions
Overall length
168.2 in (14 ft 0.2 in) / 4,272.3 mm
Overall width
87.2 in (7 ft 3.2 in) / 2,214.9 mm
Overall height
108.9 in (9 ft 0.9 in) / 2,766.1 mm
Tractor Size Comparison Chart
Overall length comparison
This model
168.2 in
Average
125.2 in
Low
44.5 in
High
346.3 in
Overall width comparison
This model
87.2 in
Average
70 in
Low
20 in
High
176 in
Overall height comparison
This model
108.9 in
Average
79.8 in
Low
36 in
High
156 in
John Deere 6425 Extra Dimension Notes
Size class note
The John Deere 6425 size class is utility tractor for practical planning. It is better suited to farm work, loader jobs, hay, livestock properties and machinery-shed storage than tight residential spaces.
Storage fit note
The John Deere 6425 belongs in a machinery shed, barn bay or farm storage space. With length 168.2 in (14 ft 0.2 in) / 4,272.3 mm, width 87.2 in (7 ft 3.2 in) / 2,214.9 mm, and height 108.9 in (9 ft 0.9 in) / 2,766.1 mm, width and height need real clearance.
Fitment note
The John Deere 6425 fitment numbers are length at 168.2 in (14 ft 0.2 in) / 4,272.3 mm, width at 87.2 in (7 ft 3.2 in) / 2,214.9 mm, and height at 108.9 in (9 ft 0.9 in) / 2,766.1 mm. These decide whether it is garage-like, shed-like or machinery-shed size.
Storage Tips
For the John Deere 6425, a realistic storage check is a clear opening around 12 ft high, 10 ft wide, and 20 ft deep, before adding long attachments.
For utility sizing, leave enough room to enter straight instead of squeezing through at an angle.
Because height is over 100 in, overhead clearance is the first storage risk.
Storage FAQ
Will it fit in a garage?
If the tractor is stored bare, compare your garage to 168.2 in long, 87.2 in wide and 108.9 in tall. If you want normal parking room, use around 12 ft high, 10 ft wide, and 20 ft deep instead.
What size door should I check?
The clean check is 12 ft high, 10 ft wide and 20 ft deep. That gives margin over the listed 108.9 in height, 87.2 in width and 168.2 in length.
Do attachments change the storage size?
Yes. Treat 168.2 in as the bare length only. If front or rear gear stays fitted, add roughly 4 ft to 8 ft to the depth check before trusting the fit.
How much maneuvering room should I allow?
Wheelbase was not captured for this row, so use the 168.2 in overall length and 87.2 in width as the parking guide. About 20 ft of straight approach is the safer target.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
