The John Deere 6415 tractor hydraulic pump flow is 15.8 GPM, and hydraulic system pressure is 2,900 psi.
Hydraulic pump flow15.8 GPM
Implement flow21 GPM
Total hydraulic flow21 GPM
Hydraulic pressure2,900 psi
Hydraulic system typeclosed-center
Hydraulic fluid capacity16.4 gal
John Deere 6415 Hydraulic Flow Details
Hydraulic pump flow
15.8 GPM
Implement hydraulic flow
21 GPM
Total hydraulic flow
21 GPM
Hydraulic system pressure
2,900 psi
Hydraulic system type
closed-center
Hydraulic fluid capacity
16.4 gal
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
15.8 GPM
Average
17.3 GPM
Low
1.2 GPM
High
110 GPM
Implement hydraulic flow comparison
This model
21 GPM
Average
17.1 GPM
Low
1.2 GPM
High
110 GPM
Total hydraulic flow comparison
This model
21 GPM
Average
16.5 GPM
Low
1.2 GPM
High
70 GPM
Hydraulic pressure comparison
This model
2,900 psi
Average
2,330.1 psi
Low
435 psi
High
3,625 psi
Hydraulic fluid capacity comparison
This model
16.4 gal
Average
8.6 gal
Low
0.6 gal
High
30.1 gal
John Deere 6415 Extra Hydraulic Notes
Hydraulic flow note
For hydraulic work, the key number on the John Deere 6415 is 21 GPM implement flow; that points toward larger loaders, rear remotes and more demanding implements, depending on pressure and valve setup.
Hydraulic pressure note
At 2,900 psi, the John Deere 6415’s hydraulic system pressure matters most for lift force, cylinder force and loader response.
Rear remotes / SCV note
Rear remotes / SCVs depend on the tractor’s hydraulic package and options.
For hydraulic implements, match the implement to the available hydraulic flow (21 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
The John Deere 6415 uses a closed-center hydraulic setup, so compatibility depends on both the attachment and valve configuration.
Hydraulic fluid capacity note
For maintenance, the John Deere 6415’s hydraulic fluid capacity matters more than flow rate because it affects oil changes, filter service and refill quantity.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
