The John Deere 6320 tractor hydraulic pump flow is 25 GPM, and hydraulic system pressure is 2,900 psi.
Hydraulic pump flow25 GPM
Implement flow51.9 L/min (13.7 GPM)
Total hydraulic flow25 GPM
Hydraulic pressure2,900 psi
Hydraulic system typeclosed-center
Hydraulic fluid capacity55 qt (13.8 gal)
John Deere 6320 Hydraulic Flow Details
Hydraulic pump flow
25 GPM
Implement hydraulic flow
51.9 L/min (13.7 GPM)
Total hydraulic flow
25 GPM
Hydraulic system pressure
2,900 psi
Hydraulic system type
closed-center
Hydraulic fluid capacity
55 qt (13.8 gal)
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
25 GPM
Average
22 GPM
Low
5.3 GPM
High
59 GPM
Implement hydraulic flow comparison
This model
13.7 GPM
Average
21.7 GPM
Low
5.3 GPM
High
43 GPM
Total hydraulic flow comparison
This model
25 GPM
Average
21.9 GPM
Low
4 GPM
High
60 GPM
Hydraulic pressure comparison
This model
2,900 psi
Average
2,726.4 psi
Low
435 psi
High
3,046 psi
Hydraulic fluid capacity comparison
This model
13.8 gal
Average
14.9 gal
Low
2.8 gal
High
43.7 gal
John Deere 6320 Extra Hydraulic Notes
Hydraulic flow note
The John Deere 6320 separates implement flow from total hydraulic flow: 13.7 GPM is the more useful number for rear remotes and hydraulic implements, while 25 GPM includes the wider system total.
Hydraulic pressure note
Hydraulic pressure on the John Deere 6320 is 2,900 psi, but hydraulic performance depends on pressure and flow together.
Rear remotes / SCV note
Rear remotes / SCVs depend on the tractor’s hydraulic package and options.
For hydraulic implements, match the implement to the available hydraulic flow (51.9 L/min (13.7 GPM)), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
The John Deere 6320’s hydraulic system type is closed-center, which is built for higher-pressure hydraulic control than a basic open-center setup.
Hydraulic fluid capacity note
Hydraulic fluid capacity on the John Deere 6320 is 55 qt (13.8 gal), but the correct oil type and fill/check procedure should still come from the official manual.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
