Fuel tank capacity for the John Deere 6310 is 7.8 gal (29.5 L). Use that as the main refueling amount, with 3.9 gal (14.8 L) as the half-tank guide.
Fuel tank capacity7.8 gal (29.5 L)Empty-to-full tank amount
Half tank3.9 gal (14.8 L)Planning guide
5-gal cansabout 2 x 5-gal cans to have enough fuel from emptyPortable fuel estimate
John Deere 6310 fuel tank capacity specs
Fuel tank capacity
7.8 gal (29.5 L)
Fuel capacity in litres
29.5 L
Half tank amount
3.9 gal (14.8 L)
5-gallon fuel cans
about 2 x 5-gal cans to have enough fuel from empty
10-litre fuel jugs
3 x 10-L jugs
Fuel capacity is a tank-size figure. Actual top-up amount and runtime depend on remaining fuel, workload, throttle use, terrain and machine condition.
John Deere 6310 fuel planning notes
Fuel capacity note
For the John Deere 6310, fuel tank capacity is 7.8 gal (29.5 L). This helps with fill-up planning, fuel storage and estimating how much fuel to bring to a job.
Refill planning
For an empty-to-full refill on the John Deere 6310, plan for about 2 x 5-gal cans or 3 x 10-L jugs. Real fill amount can be slightly lower if fuel remains in the tank.
Fuel tank capacity guide
This model
7.8 gal
Guide low
5 gal
Guide typical
12 gal
Guide high
22 gal
Compared with a broad compact fuel tank guide, selected from the listed tank size.
John Deere 6310 fuel capacity FAQ
What is the empty-to-full fuel amount for the John Deere 6310?
The listed fuel capacity for the John Deere 6310 is 7.8 gal (29.5 L). Treat it as the full tank size when planning fuel.
How many litres is the John Deere 6310 fuel tank?
The John Deere 6310 fuel tank is 7.8 gal (29.5 L), which converts to about 29.5 litres.
What is the half-tank amount for the John Deere 6310?
The John Deere 6310 half-tank amount is 3.9 gal (14.8 L). If the machine is on a slope, the gauge may read differently.
How many fuel cans are needed to fill the John Deere 6310?
To fill the John Deere 6310 from empty, budget about 2 x 5-gal cans or 3 x 10-L jugs. If it is only low rather than empty, reduce that amount.
How far can the John Deere 6310 go on a tank?
The John Deere 6310 tank size is 7.8 gal (29.5 L), but runtime changes with workload. Fuel use is higher with tillage, heavy pulling, high hydraulic demand, PTO work or hard transport use than with light transport, low-load PTO work or easier field conditions.
Is the John Deere 6310 fuel tank small or large?
The John Deere 6310 tank is a small-to-utility size at 7.8 gal (29.5 L). It is easy to plan around standard 5-gallon cans.
Can the John Deere 6310 take less fuel than the listed tank size?
The John Deere 6310 can take less than 7.8 gal (29.5 L) if it is not fully empty. Do not force extra fuel into the filler neck.
Official information note
Mistakes do happen. Check the operator manual, service manual and official deere.com website for official fuel capacity specifications.
