The John Deere 6250R is 204.3 in long, 100.4 in wide, and 128 in tall.
Length204.3 in (17 ft 0.3 in) / 5,189.2 mm
Width100.4 in (8 ft 4.4 in) / 2,550.2 mm
Height128 in (10 ft 8 in) / 3,251.2 mm
John Deere 6250R Dimensions
Overall length
204.3 in (17 ft 0.3 in) / 5,189.2 mm
Overall width
100.4 in (8 ft 4.4 in) / 2,550.2 mm
Overall height
128 in (10 ft 8 in) / 3,251.2 mm
Tractor Size Comparison Chart
Overall length comparison
This model
204.3 in
Average
125.2 in
Low
44.5 in
High
346.3 in
Overall width comparison
This model
100.4 in
Average
70 in
Low
20 in
High
176 in
Overall height comparison
This model
128 in
Average
79.8 in
Low
36 in
High
156 in
John Deere 6250R Extra Dimension Notes
Size class note
The John Deere 6250R reads as a utility tractor once length, width and height are considered. It is better suited to farm work, loader jobs, hay, livestock properties and machinery-shed storage than tight residential spaces.
Fitment note
The John Deere 6250R dimensions show length at 204.3 in (17 ft 0.3 in) / 5,189.2 mm, width at 100.4 in (8 ft 4.4 in) / 2,550.2 mm, and height at 128 in (10 ft 8 in) / 3,251.2 mm. Leave extra room for implements, loader frames, tires and steering angle.
Storage Tips
A farm shed or machinery bay is the sensible storage target for the John Deere 6250R.
Use the bare dimensions only as a starting point; a practical storage target is a clear opening around 14 ft high, 12 ft wide, and 24 ft deep.
For taller tractors, a door that looks close is not good enough – measure it.
Storage FAQ
Will it fit in a garage?
If your garage door is close to 128 in tall or 100.4 in wide, count it as too tight. The safer check for the John Deere 6250R is around 14 ft high, 12 ft wide, and 24 ft deep.
What size door should I check?
Use the John Deere 6250R’s dimensions directly: 128 in tall needs more than a 128 in opening, 100.4 in wide needs side clearance, and 204.3 in long needs about 24 ft bay depth.
Do attachments change the storage size?
Yes. If you park it with the loader or implement fitted, measure that setup; do not assume the listed 204.3 in length and 100.4 in width still describe the parked machine.
How much maneuvering room should I allow?
If an attachment stays on, base the turning room on the attached length, not just the captured 204.3 in tractor length.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
