The John Deere 6180J is 107.5 in long and 71.2 in wide.
Length107.5 in (8 ft 11.5 in) / 2,730.5 mm
Width71.2 in (5 ft 11.2 in) / 1,808.5 mm
Ground clearance20.5 in (1 ft 8.5 in) / 520.7 mm
John Deere 6180J Dimensions
Overall length
107.5 in (8 ft 11.5 in) / 2,730.5 mm
Overall width
71.2 in (5 ft 11.2 in) / 1,808.5 mm
Ground clearance
20.5 in (1 ft 8.5 in) / 520.7 mm
Rear tread width
71.2 in (5 ft 11.2 in) / 1,808.5 mm
Tractor Size Comparison Chart
Overall length comparison
This model
107.5 in
Average
138.9 in
Low
63 in
High
346.3 in
Overall width comparison
This model
71.2 in
Average
64.6 in
Low
20 in
High
144 in
Ground clearance comparison
This model
20.5 in
Average
16.4 in
Low
3.5 in
High
65.4 in
John Deere 6180J Extra Dimension Notes
Fitment note
The John Deere 6180J is best judged by length at 107.5 in (8 ft 11.5 in) / 2,730.5 mm and width at 71.2 in (5 ft 11.2 in) / 1,808.5 mm. The biggest issue is usually width or height, not just floor length.
Ground clearance note
The John Deere 6180J ground clearance spec is 20.5 in (1 ft 8.5 in) / 520.7 mm. It helps decide how forgiving the tractor is on uneven ground.
Tread width note
The captured tread data for the John Deere 6180J gives rear tread only: 71.2 in (5 ft 11.2 in) / 1,808.5 mm.
Storage Tips
Floor space is not enough; check the door height, side clearance and attachment length.
For a compact tractor, storage usually comes down to doorway height and attachment length.
Storage FAQ
Will it fit in a garage?
At 107.5 in long and 71.2 in wide, a garage may work only if the door and bay are bigger than the tractor, not just equal to it. Use about 8 ft wide and 15 ft deep before counting attachments.
What size door should I check?
For this compact tractor, check the narrowest real opening. A doorway close to 71.2 in wide or height not captured tall is not enough; aim for roughly 8 ft wide, 15 ft deep.
Do attachments change the storage size?
Yes. The bare tractor is 107.5 in long, 71.2 in wide and height not captured tall; a loader, mower deck, ballast box or rear implement can push the parked size past those numbers.
How much maneuvering room should I allow?
A straight run into the bay is the cleanest setup. For a 107.5 in long tractor, about 12 ft outside the door is a better benchmark than squeezing in from a tight turn.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
