The John Deere 6155R tractor hydraulic pump flow is 30.1 GPM, and hydraulic system pressure is 2,900 psi.
Hydraulic pump flow30.1 GPM
Implement flow30.1 GPM
Total hydraulic flow30.1 GPM
Hydraulic pressure2,900 psi
Hydraulic system typeclosed-center
John Deere 6155R Hydraulic Flow Details
Hydraulic pump flow
30.1 GPM
Implement hydraulic flow
30.1 GPM
Total hydraulic flow
30.1 GPM
Hydraulic system pressure
2,900 psi
Hydraulic system type
closed-center
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
30.1 GPM
Average
22 GPM
Low
5.3 GPM
High
59 GPM
Implement hydraulic flow comparison
This model
30.1 GPM
Average
21.7 GPM
Low
5.3 GPM
High
43 GPM
Total hydraulic flow comparison
This model
30.1 GPM
Average
21.9 GPM
Low
4 GPM
High
60 GPM
Hydraulic pressure comparison
This model
2,900 psi
Average
2,726.4 psi
Low
435 psi
High
3,046 psi
John Deere 6155R Extra Hydraulic Notes
Hydraulic flow note
The John Deere 6155R’s implement flow figure is about 30.1 GPM, so hydraulic attachment choice should be based on flow demand, not horsepower alone.
Hydraulic pressure note
At 2,900 psi, the John Deere 6155R’s hydraulic system pressure matters most for lift force, cylinder force and loader response.
Rear remotes / SCV note
Rear remotes / SCVs depend on the tractor’s hydraulic package and options.
For hydraulic implements, match the implement to the available hydraulic flow (30.1 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
The John Deere 6155R uses a closed-center hydraulic setup, so compatibility depends on both the attachment and valve configuration.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
