The John Deere 6150M is 176.6 in long, 100.4 in wide, and 113.1 in tall, with a 108.9 in wheelbase.
Length176.6 in (14 ft 8.6 in) / 4,485.6 mm
Width100.4 in (8 ft 4.4 in) / 2,550.2 mm
Height113.1 in (9 ft 5.1 in) / 2,872.7 mm
Wheelbase108.9 in (9 ft 0.9 in) / 2,766.1 mm
Ground clearance20.5 in (1 ft 8.5 in) / 520.7 mm
John Deere 6150M Dimensions
Overall length
176.6 in (14 ft 8.6 in) / 4,485.6 mm
Overall width
100.4 in (8 ft 4.4 in) / 2,550.2 mm
Overall height
113.1 in (9 ft 5.1 in) / 2,872.7 mm
Wheelbase
108.9 in (9 ft 0.9 in) / 2,766.1 mm
Ground clearance
20.5 in (1 ft 8.5 in) / 520.7 mm
Tractor Size Comparison Chart
Overall length comparison
This model
176.6 in
Average
125.2 in
Low
44.5 in
High
346.3 in
Overall width comparison
This model
100.4 in
Average
70 in
Low
20 in
High
176 in
Overall height comparison
This model
113.1 in
Average
79.8 in
Low
36 in
High
156 in
Wheelbase comparison
This model
108.9 in
Average
82.8 in
Low
34.8 in
High
190.5 in
Ground clearance comparison
This model
20.5 in
Average
16.3 in
Low
3.5 in
High
65.4 in
John Deere 6150M Extra Dimension Notes
Size class note
From a storage and access point of view, the John Deere 6150M behaves like a utility tractor. It is better suited to farm work, loader jobs, hay, livestock properties and machinery-shed storage than tight residential spaces.
Storage fit note
The John Deere 6150M is not something to squeeze into tight domestic storage. With length 176.6 in (14 ft 8.6 in) / 4,485.6 mm, width 100.4 in (8 ft 4.4 in) / 2,550.2 mm, and height 113.1 in (9 ft 5.1 in) / 2,872.7 mm, use machinery-shed expectations.
Fitment note
The John Deere 6150M is best judged by length at 176.6 in (14 ft 8.6 in) / 4,485.6 mm, width at 100.4 in (8 ft 4.4 in) / 2,550.2 mm, and height at 113.1 in (9 ft 5.1 in) / 2,872.7 mm. The biggest issue is usually width or height, not just floor length.
Wheelbase note
The John Deere 6150M gives a wheelbase figure of 108.9 in (9 ft 0.9 in) / 2,766.1 mm. That helps describe the tractor’s stance.
Ground clearance note
The John Deere 6150M ground clearance spec is 20.5 in (1 ft 8.5 in) / 520.7 mm. It helps decide how forgiving the tractor is on uneven ground.
Storage Tips
Leave room around the John Deere 6150M for mirrors, steps, tires, cab/ROPS and attachments.
Utility tractors are usually happier in a farm shed than a residential-style garage.
Use the 108.9 in wheelbase as a clue for how much approach room is needed near the shed entrance.
Overhead clearance should be measured at the lowest part of the doorway, not the tallest part of the shed.
Storage FAQ
Will it fit in a garage?
For the John Deere 6150M, the listed storage problem is simple: 113.1 in height, 100.4 in width and 176.6 in length all have to clear. The sensible garage/shed target is 12 ft high, 12 ft wide, and 20 ft deep.
What size door should I check?
Start with the hard numbers: 113.1 in high, 100.4 in wide and 176.6 in long. Then step up to a practical storage target of about 12 ft high, 12 ft wide, and 20 ft deep.
Do attachments change the storage size?
Yes. If the bay only clears the listed 176.6 in length, it is too short once attachments stay on. Use about 20 ft bare, then add attachment length.
How much maneuvering room should I allow?
The 176.6 in length needs bay depth, but the 108.9 in wheelbase needs lineup room. Treat about 20 ft outside the shed as the practical approach zone.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
