The John Deere 6135E is 96 in wide and 120 in tall, with a 96.5 in wheelbase.
Width96 in (8 ft 0 in) / 2,438.4 mm
Height120 in (10 ft 0 in) / 3,048 mm
Wheelbase96.5 in (8 ft 0.5 in) / 2,451.1 mm
John Deere 6135E Dimensions
Overall width
96 in (8 ft 0 in) / 2,438.4 mm
Overall height
120 in (10 ft 0 in) / 3,048 mm
Wheelbase
96.5 in (8 ft 0.5 in) / 2,451.1 mm
Tractor Size Comparison Chart
Overall width comparison
This model
96 in
Average
70 in
Low
20 in
High
176 in
Overall height comparison
This model
120 in
Average
79.8 in
Low
36 in
High
156 in
Wheelbase comparison
This model
96.5 in
Average
82.8 in
Low
34.8 in
High
190.5 in
John Deere 6135E Extra Dimension Notes
Storage fit note
The John Deere 6135E is a shed-bay tractor rather than a garage tractor. With width 96 in (8 ft 0 in) / 2,438.4 mm and height 120 in (10 ft 0 in) / 3,048 mm, leave margin for height and width.
Fitment note
The John Deere 6135E dimension row shows width at 96 in (8 ft 0 in) / 2,438.4 mm and height at 120 in (10 ft 0 in) / 3,048 mm. Treat those as the headline measurements for storage, transport and property access.
Wheelbase note
Wheelbase is listed at 96.5 in (8 ft 0.5 in) / 2,451.1 mm for the John Deere 6135E. That is one of the main chassis-size measurements.
Storage Tips
Leave room around the John Deere 6135E for mirrors, steps, tires, cab/ROPS and attachments.
Measure the lowest overhead point, not the tallest part of the shed roof.
For this class, doorway width and attachment clearance are major planning numbers.
Use the 96.5 in wheelbase as a clue for how much approach room is needed near the shed entrance.
Overhead clearance should be measured at the lowest part of the doorway, not the tallest part of the shed.
Storage FAQ
Will it fit in a garage?
Because the John Deere 6135E is 120 in tall and 96 in wide, door track height and side posts matter. Because it is length not captured long, the bay also needs about the tractor length plus attachment room of usable depth.
What size door should I check?
The clean check is 14 ft high, 12 ft wide and the tractor length plus attachment room deep. That gives margin over the listed 120 in height, 96 in width and length not captured length.
Do attachments change the storage size?
Yes. Treat length not captured as the bare length only. If front or rear gear stays fitted, add roughly 8 ft to 15 ft to the depth check before trusting the fit.
How much maneuvering room should I allow?
For easier parking, keep the final approach straight and clear. With a 96.5 in wheelbase and 96 in width, tight offset entries are where damage happens.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
