The John Deere 6125R tractor hydraulic pump flow is 21.1 GPM, and hydraulic system pressure is 2,900 psi.
Hydraulic pump flow21.1 GPM
Implement flow21.1 GPM
Total hydraulic flow39 GPM
Hydraulic pressure2,900 psi
Hydraulic system typeclosed-center pressure-flow compensated
Hydraulic fluid capacity30 gal
John Deere 6125R Hydraulic Flow Details
Hydraulic pump flow
21.1 GPM
Implement hydraulic flow
21.1 GPM
Total hydraulic flow
39 GPM
Hydraulic system pressure
2,900 psi
Hydraulic system type
closed-center pressure-flow compensated
Hydraulic fluid capacity
30 gal
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
21.1 GPM
Average
17.3 GPM
Low
1.2 GPM
High
110 GPM
Implement hydraulic flow comparison
This model
21.1 GPM
Average
17.1 GPM
Low
1.2 GPM
High
110 GPM
Total hydraulic flow comparison
This model
39 GPM
Average
16.5 GPM
Low
1.2 GPM
High
70 GPM
Hydraulic pressure comparison
This model
2,900 psi
Average
2,330.1 psi
Low
435 psi
High
3,625 psi
Hydraulic fluid capacity comparison
This model
30 gal
Average
8.6 gal
Low
0.6 gal
High
30.1 gal
John Deere 6125R Extra Hydraulic Notes
Hydraulic flow note
The John Deere 6125R’s total flow is higher than implement flow, so use the implement-flow number when matching hydraulic tools and SCV-driven equipment.
Hydraulic pressure note
At 2,900 psi, the John Deere 6125R’s hydraulic system pressure matters most for lift force, cylinder force and loader response.
Rear remotes / SCV note
Rear remotes / SCVs depend on the tractor’s hydraulic package and options.
For hydraulic implements, match the implement to the available hydraulic flow (21.1 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
The John Deere 6125R’s hydraulic system type is closed-center pressure-flow compensated, which is more advanced and better suited to variable hydraulic demand.
Hydraulic fluid capacity note
The John Deere 6125R’s hydraulic fluid capacity is listed as 30 gal; check the operator manual before servicing because capacity can change with transmission, hydraulic options and market.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
