The John Deere 6110R is 198.6 in long, 100.4 in wide, and 124.3 in tall, with a 102 in wheelbase.
Length198.6 in (16 ft 6.6 in) / 5,044.4 mm
Width100.4 in (8 ft 4.4 in) / 2,550.2 mm
Height124.3 in (10 ft 4.3 in) / 3,157.2 mm
Wheelbase102 in (8 ft 6 in) / 2,590.8 mm
John Deere 6110R Dimensions
Overall length
198.6 in (16 ft 6.6 in) / 5,044.4 mm
Overall width
100.4 in (8 ft 4.4 in) / 2,550.2 mm
Overall height
124.3 in (10 ft 4.3 in) / 3,157.2 mm
Wheelbase
102 in (8 ft 6 in) / 2,590.8 mm
Tractor Size Comparison Chart
Overall length comparison
This model
198.6 in
Average
125.2 in
Low
44.5 in
High
346.3 in
Overall width comparison
This model
100.4 in
Average
70 in
Low
20 in
High
176 in
Overall height comparison
This model
124.3 in
Average
79.8 in
Low
36 in
High
156 in
Wheelbase comparison
This model
102 in
Average
82.8 in
Low
34.8 in
High
190.5 in
John Deere 6110R Extra Dimension Notes
Size class note
The John Deere 6110R size data makes the most sense when viewed as a utility tractor. It is better suited to farm work, loader jobs, hay, livestock properties and machinery-shed storage than tight residential spaces.
Storage fit note
For the John Deere 6110R, the practical storage answer is a machinery shed or tall farm bay. With length 198.6 in (16 ft 6.6 in) / 5,044.4 mm, width 100.4 in (8 ft 4.4 in) / 2,550.2 mm, and height 124.3 in (10 ft 4.3 in) / 3,157.2 mm, measure carefully.
Fitment note
The John Deere 6110R size numbers are length at 198.6 in (16 ft 6.6 in) / 5,044.4 mm, width at 100.4 in (8 ft 4.4 in) / 2,550.2 mm, and height at 124.3 in (10 ft 4.3 in) / 3,157.2 mm. Use those before assuming it will fit into an existing bay or shed.
Wheelbase note
The John Deere 6110R wheelbase spec is 102 in (8 ft 6 in) / 2,590.8 mm, which gives better size context than length alone.
Storage Tips
A farm shed or machinery bay is the sensible storage target for the John Deere 6110R.
If the tractor is stored with a loader or rear implement, add more bay depth than the bare length suggests.
Wheelbase is 102 in, so leave room to line it up cleanly rather than forcing it through a tight angle.
For taller tractors, a door that looks close is not good enough – measure it.
Storage FAQ
Will it fit in a garage?
This tractor’s 198.6 in length and 124.3 in height make ordinary garage storage doubtful unless the opening is oversized. Use 12 ft high, 12 ft wide, 24 ft deep as the practical benchmark.
What size door should I check?
If there are posts, tracks or stored gear near the doorway, go bigger than 12 ft by 12 ft. The tractor’s base size is 198.6 in long and 100.4 in wide before attachments.
Do attachments change the storage size?
Yes. Measure the tractor in storage trim: highest point compared with 124.3 in, widest point compared with 100.4 in, and longest parked length compared with 198.6 in.
How much maneuvering room should I allow?
If you cannot approach straight, go wider than 12 ft. With 100.4 in tractor width and a 102 in wheelbase, angled entries need extra side margin.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
