The John Deere 5525 is 72.1 in wide and 99.4 in tall, with a 85.7 in wheelbase.
Width72.1 in (6 ft 0.1 in) / 1,831.3 mm
Height99.4 in (8 ft 3.4 in) / 2,524.8 mm
Wheelbase85.7 in (7 ft 1.7 in) / 2,176.8 mm
Ground clearance18.8 in (1 ft 6.8 in) / 477.5 mm
John Deere 5525 Dimensions
Overall width
72.1 in (6 ft 0.1 in) / 1,831.3 mm
Overall height
99.4 in (8 ft 3.4 in) / 2,524.8 mm
Wheelbase
85.7 in (7 ft 1.7 in) / 2,176.8 mm
Ground clearance
18.8 in (1 ft 6.8 in) / 477.5 mm
Tractor Size Comparison Chart
Overall width comparison
This model
72.1 in
Average
70 in
Low
20 in
High
176 in
Overall height comparison
This model
99.4 in
Average
79.8 in
Low
36 in
High
156 in
Wheelbase comparison
This model
85.7 in
Average
82.8 in
Low
34.8 in
High
190.5 in
Ground clearance comparison
This model
18.8 in
Average
16.3 in
Low
3.5 in
High
65.4 in
John Deere 5525 Extra Dimension Notes
Fitment note
The John Deere 5525 fitment numbers are width at 72.1 in (6 ft 0.1 in) / 1,831.3 mm and height at 99.4 in (8 ft 3.4 in) / 2,524.8 mm. These decide whether it is garage-like, shed-like or machinery-shed size.
Wheelbase note
The John Deere 5525 wheelbase measurement is 85.7 in (7 ft 1.7 in) / 2,176.8 mm. It is a better handling clue than overall length by itself.
Ground clearance note
The John Deere 5525 captured clearance is 18.8 in (1 ft 6.8 in) / 477.5 mm. This tells you how much room there is under the tractor.
Storage Tips
For the John Deere 5525, standard low garage openings are risky; check against 12 ft high and 12 ft wide instead.
Expect large shed requirements, especially with duals, tracks or implements fitted.
The 85.7 in wheelbase is useful when judging trailer position and shed maneuvering room.
Storage FAQ
Will it fit in a garage?
Because the John Deere 5525 is 99.4 in tall and 72.1 in wide, door track height and side posts matter. Because it is length not captured long, the bay also needs about the tractor length plus attachment room of usable depth.
What size door should I check?
The clean check is 12 ft high, 12 ft wide and the tractor length plus attachment room deep. That gives margin over the listed 99.4 in height, 72.1 in width and length not captured length.
Do attachments change the storage size?
Yes. Measure the tractor in storage trim: highest point compared with 99.4 in, widest point compared with 72.1 in, and longest parked length compared with length not captured.
How much maneuvering room should I allow?
If you cannot approach straight, go wider than 12 ft. With 72.1 in tractor width and a 85.7 in wheelbase, angled entries need extra side margin.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
