John Deere 5515 Dimensions, Length, Width & Height

Quick answer:

The John Deere 5515 is 139.8 in long and 52.4 in wide.

Length139.8 in (11 ft 7.8 in) / 3,550.9 mm
Width52.4 in (4 ft 4.4 in) / 1,331 mm

John Deere 5515 Dimensions

Overall length 139.8 in (11 ft 7.8 in) / 3,550.9 mm
Overall width 52.4 in (4 ft 4.4 in) / 1,331 mm
Rear tread width 13.6 in (1 ft 1.6 in) / 345.4 mm

Tractor Size Comparison Chart

Overall length comparison

This model

139.8 in

Average

125.2 in

Low

44.5 in

High

346.3 in

Overall width comparison

This model

52.4 in

Average

70 in

Low

20 in

High

176 in

John Deere 5515 Extra Dimension Notes

Fitment note The John Deere 5515 size data gives length at 139.8 in (11 ft 7.8 in) / 3,550.9 mm and width at 52.4 in (4 ft 4.4 in) / 1,331 mm. Add margin for cab roof, loader arms, mirrors and wheel equipment.
Tread width note Rear tread for the John Deere 5515 is listed as 13.6 in (1 ft 1.6 in) / 345.4 mm. The front figure was not captured clearly.

Storage Tips

  • Do not assume residential garage fit unless height and bay depth both clear comfortably.

Storage FAQ

Will it fit in a garage?

A tight garage is a bad match when the machine is 139.8 in long and 52.4 in wide. The John Deere 5515 needs a clear opening and bay closer to 8 ft wide and 15 ft deep for comfortable storage.

What size door should I check?

Do not size the door to exactly height not captured by 52.4 in. For this model, use about the tractor height plus clearance height and 8 ft width, then allow 15 ft depth for the 139.8 in tractor length.

Do attachments change the storage size?

Yes. A tight bay should be planned around the attached setup. For this compact tractor, allow about 3 ft to 6 ft extra depth if gear stays on.

How much maneuvering room should I allow?

Use the 139.8 in length as the maneuvering clue here. A bay around 15 ft deep still needs approach room outside the shed, especially if implements stay fitted.

Official information note

Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.