The John Deere 5420 tractor hydraulic pump flow is 15.9 GPM, and hydraulic system pressure is 2,800 psi.
Hydraulic pump flow15.9 GPM
Implement flow15.9 GPM
Total hydraulic flow15.9 GPM
Hydraulic pressure2,800 psi
Hydraulic system typeopen-center
Hydraulic fluid capacity10 gal
John Deere 5420 Hydraulic Flow Details
Hydraulic pump flow
15.9 GPM
Implement hydraulic flow
15.9 GPM
Total hydraulic flow
15.9 GPM
Hydraulic system pressure
2,800 psi
Hydraulic system type
open-center
Hydraulic fluid capacity
10 gal
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
15.9 GPM
Average
22 GPM
Low
5.3 GPM
High
59 GPM
Implement hydraulic flow comparison
This model
15.9 GPM
Average
21.7 GPM
Low
5.3 GPM
High
43 GPM
Total hydraulic flow comparison
This model
15.9 GPM
Average
21.9 GPM
Low
4 GPM
High
60 GPM
Hydraulic pressure comparison
This model
2,800 psi
Average
2,726.4 psi
Low
435 psi
High
3,046 psi
Hydraulic fluid capacity comparison
This model
10 gal
Average
14.9 gal
Low
2.8 gal
High
43.7 gal
John Deere 5420 Extra Hydraulic Notes
Hydraulic flow note
With about 15.9 GPM implement flow, the John Deere 5420 sits in the utility tractor hydraulic range and is best suited to larger loaders, rear remotes and more demanding implements, depending on pressure and valve setup.
Hydraulic pressure note
At 2,800 psi, the John Deere 5420’s hydraulic system pressure matters most for lift force, cylinder force and loader response.
Rear remotes / SCV note
Rear remotes / SCVs depend on the tractor’s hydraulic package and options.
For hydraulic implements, match the implement to the available hydraulic flow (15.9 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
The John Deere 5420 uses a open-center hydraulic setup, so compatibility depends on both the attachment and valve configuration.
Hydraulic fluid capacity note
The John Deere 5420’s hydraulic fluid capacity is listed as 10 gal; check the operator manual before servicing because capacity can change with transmission, hydraulic options and market.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
