The John Deere 5310 is 66.7 in wide, with a 80.7 in wheelbase.
Width66.7 in (5 ft 6.7 in) / 1,694.2 mm
Wheelbase80.7 in (6 ft 8.7 in) / 2,049.8 mm
Ground clearance14.8 in (1 ft 2.8 in) / 375.9 mm
John Deere 5310 Dimensions
Overall width
66.7 in (5 ft 6.7 in) / 1,694.2 mm
Wheelbase
80.7 in (6 ft 8.7 in) / 2,049.8 mm
Ground clearance
14.8 in (1 ft 2.8 in) / 375.9 mm
Tractor Size Comparison Chart
Overall width comparison
This model
66.7 in
Average
70 in
Low
20 in
High
176 in
Wheelbase comparison
This model
80.7 in
Average
82.8 in
Low
34.8 in
High
190.5 in
Ground clearance comparison
This model
14.8 in
Average
16.3 in
Low
3.5 in
High
65.4 in
John Deere 5310 Extra Dimension Notes
Fitment note
The John Deere 5310 has listed dimensions of width at 66.7 in (5 ft 6.7 in) / 1,694.2 mm. Treat them as the starting point for storage and trailer planning.
Wheelbase note
The John Deere 5310 wheelbase is listed at 80.7 in (6 ft 8.7 in) / 2,049.8 mm. Wheelbase helps explain how planted or compact the tractor feels compared with similar models.
Ground clearance note
The John Deere 5310 shows 14.8 in (1 ft 2.8 in) / 375.9 mm ground clearance. That is the underside clearance figure in the dimension set.
Storage Tips
Floor space is not enough; check the door height, side clearance and attachment length.
For this class, doorway width and attachment clearance are major planning numbers.
Use the 80.7 in wheelbase as a clue for how much approach room is needed near the shed entrance.
Storage FAQ
Will it fit in a garage?
If your garage door is close to height not captured tall or 66.7 in wide, count it as too tight. The safer check for the John Deere 5310 is around 10 ft wide.
What size door should I check?
Use 10 ft wide as the door-and-bay target. That is based on the tractor’s height not captured height, 66.7 in width and length not captured length, plus working clearance.
Do attachments change the storage size?
Yes. Keep the bare dimensions in mind: length not captured long, 66.7 in wide and height not captured tall. Then add attachment overhang, folded ROPS/cab height and mower or tire width.
How much maneuvering room should I allow?
A short answer: give the tractor enough room to approach straight, not just enough room to fit inside. With 80.7 in wheelbase, about 16 ft outside the opening is a better check.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
