The John Deere 5205 tractor hydraulic pump flow is 17.4 GPM, and hydraulic system pressure is 2,755 psi.
Hydraulic pump flow17.4 GPM
Implement flow25.5 GPM
Total hydraulic flow25.5 GPM
Hydraulic pressure2,755 psi
Hydraulic system typeopen-center
Hydraulic fluid capacity8.7 gal
John Deere 5205 Hydraulic Flow Details
Hydraulic pump flow
17.4 GPM
Implement hydraulic flow
25.5 GPM
Total hydraulic flow
25.5 GPM
Hydraulic system pressure
2,755 psi
Hydraulic system type
open-center
Hydraulic fluid capacity
8.7 gal
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
17.4 GPM
Average
17.3 GPM
Low
1.2 GPM
High
110 GPM
Implement hydraulic flow comparison
This model
25.5 GPM
Average
17.1 GPM
Low
1.2 GPM
High
110 GPM
Total hydraulic flow comparison
This model
25.5 GPM
Average
16.5 GPM
Low
1.2 GPM
High
70 GPM
Hydraulic pressure comparison
This model
2,755 psi
Average
2,330.1 psi
Low
435 psi
High
3,625 psi
Hydraulic fluid capacity comparison
This model
8.7 gal
Average
8.6 gal
Low
0.6 gal
High
30.1 gal
John Deere 5205 Extra Hydraulic Notes
Hydraulic flow note
With about 25.5 GPM implement flow, the John Deere 5205 sits in the high-flow row-crop hydraulic range and is best suited to multiple SCVs, larger implements and heavier hydraulic demand.
Hydraulic pressure note
At 2,755 psi, the John Deere 5205’s hydraulic system pressure matters most for lift force, cylinder force and loader response.
Rear remotes / SCV note
Rear remotes / SCVs depend on the tractor’s hydraulic package and options.
For hydraulic implements, match the implement to the available hydraulic flow (25.5 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
The John Deere 5205 uses a open-center hydraulic setup, so compatibility depends on both the attachment and valve configuration.
Hydraulic fluid capacity note
For maintenance, the John Deere 5205’s hydraulic fluid capacity matters more than flow rate because it affects oil changes, filter service and refill quantity.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
