The John Deere 5100ML tractor hydraulic pump flow is 18.4 GPM, and hydraulic system pressure is 2,901 psi.
Hydraulic pump flow18.4 GPM
Implement flow24.7 GPM
Total hydraulic flow24.7 GPM
Hydraulic pressure2,901 psi
Hydraulic system typeopen-center
Hydraulic fluid capacity10 gal
John Deere 5100ML Hydraulic Flow Details
Hydraulic pump flow
18.4 GPM
Implement hydraulic flow
24.7 GPM
Total hydraulic flow
24.7 GPM
Hydraulic system pressure
2,901 psi
Hydraulic system type
open-center
Hydraulic fluid capacity
10 gal
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
18.4 GPM
Average
22 GPM
Low
5.3 GPM
High
59 GPM
Implement hydraulic flow comparison
This model
24.7 GPM
Average
21.7 GPM
Low
5.3 GPM
High
43 GPM
Total hydraulic flow comparison
This model
24.7 GPM
Average
21.9 GPM
Low
4 GPM
High
60 GPM
Hydraulic pressure comparison
This model
2,901 psi
Average
2,726.4 psi
Low
435 psi
High
3,046 psi
Hydraulic fluid capacity comparison
This model
10 gal
Average
14.9 gal
Low
2.8 gal
High
43.7 gal
John Deere 5100ML Extra Hydraulic Notes
Hydraulic flow note
The John Deere 5100ML’s implement flow figure is about 24.7 GPM, so hydraulic attachment choice should be based on flow demand, not horsepower alone.
Hydraulic pressure note
The John Deere 5100ML’s hydraulic pressure is listed at 2,901 psi, which is strong tractor hydraulic pressure; flow still decides attachment speed while pressure affects force.
Rear remotes / SCV note
Rear remotes / SCVs depend on the tractor’s hydraulic package and options.
For hydraulic implements, match the implement to the available hydraulic flow (24.7 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
System type matters on the John Deere 5100ML: open-center affects how hydraulic flow and pressure are delivered to valves and implements.
Hydraulic fluid capacity note
Hydraulic fluid capacity on the John Deere 5100ML is 10 gal, but the correct oil type and fill/check procedure should still come from the official manual.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
