The John Deere 5090E has a 3-point hitch lift capacity of 3,213 lb (1,457 kg). It also lists hitch category Category 2 and rear PTO power 75 hp.
Best rear lift figure3,213 lb (1,457 kg)
Hitch categoryCategory 2
Rear PTO horsepower75 hp
John Deere 5090E 3-Point Hitch Lift Capacity
3-point hitch lift capacity
3,213 lb (1,457 kg)
Hitch category
Category 2
Rear PTO horsepower
75 hp
Operating weight
7,275 lb (3,300 kg)
Rear Lift Capacity Comparison Chart
Best rear lift comparison
This model
3,213 lb
Average
8,101 lb
Low
550 lb
High
29,750 lb
Rear PTO horsepower comparison
This model
75 hp
Average
132 hp
Low
11 hp
High
620 hp
John Deere 5090E Hitch and Rear Lift Notes
Rear lift capacity note
For implement matching, the John Deere 5090E should be judged from the 3,213 lb (1,457 kg) 3-point hitch lift capacity figure. That gives a better real-world read than horsepower alone
Hitch category note
The John Deere 5090E uses Category 2 hitch sizing in the captured data. Category mismatch is how people end up with implements that do not fit cleanly
PTO and weight context
The extra context for the John Deere 5090E is simple: rear PTO horsepower is 75 hp and operating weight is 7,275 lb (3,300 kg). That helps separate what it can lift from what it can actually run well
Rear implement matching
The John Deere 5090E hitch spec is useful because it helps judge whether attachments like rotary cutter, medium tiller, grader blade, seeder, and heavy ballast box are in the right size range
John Deere 5090E 3-Point Hitch FAQ
How strong is the John Deere 5090E 3-point hitch?
The John Deere 5090E hitch data points to 3,213 lb (1,457 kg) for 3-point hitch lift capacity. In practical terms, this puts it in utility rear-lift tractor territory.
Is rear lift capacity always measured the same way?
No. For the John Deere 5090E, check whether the figure is measured at the hitch ends or 24 in / 610 mm behind the hitch. The behind-the-hitch number is usually more realistic.
Does hitch category matter on the John Deere 5090E?
Yes. The John Deere 5090E is listed as Category 2, and that decides what rear implements physically connect cleanly.
How should I match rear implements to the John Deere 5090E?
Start with 3,213 lb (1,457 kg) for 3-point hitch lift capacity, then compare the actual implement weight and overhang. Typical checks include rotary cutter, medium tiller, grader blade, seeder, and heavy ballast box.
Does PTO horsepower matter with the John Deere 5090E rear hitch?
Yes. The John Deere 5090E lists rear PTO power of 75 hp and operating weight of 7,275 lb (3,300 kg). Lift capacity says what it can raise; PTO power and weight help decide what it can run and control.
Official information note
Mistakes do happen. Tractor hitch lift specs can change by year, market, tire setup, ballast, hitch option and measurement point. Please check the operator manual, build sheet and official deere.com website for official information before buying or lifting heavy implements.
