The John Deere 5085M tractor hydraulic pump flow is 24.7 GPM, and hydraulic system pressure is 2,828 psi.
Hydraulic pump flow24.7 GPM
Implement flow18.4 GPM
Total hydraulic flow18.4 GPM
Hydraulic pressure2,828 psi
Hydraulic system typeopen-center
Hydraulic fluid capacity15.8 gal
John Deere 5085M Hydraulic Flow Details
Hydraulic pump flow
24.7 GPM
Implement hydraulic flow
18.4 GPM
Total hydraulic flow
18.4 GPM
Hydraulic system pressure
2,828 psi
Hydraulic system type
open-center
Hydraulic fluid capacity
15.8 gal
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
24.7 GPM
Average
22 GPM
Low
5.3 GPM
High
59 GPM
Implement hydraulic flow comparison
This model
18.4 GPM
Average
21.7 GPM
Low
5.3 GPM
High
43 GPM
Total hydraulic flow comparison
This model
18.4 GPM
Average
21.9 GPM
Low
4 GPM
High
60 GPM
Hydraulic pressure comparison
This model
2,828 psi
Average
2,726.4 psi
Low
435 psi
High
3,046 psi
Hydraulic fluid capacity comparison
This model
15.8 gal
Average
14.9 gal
Low
2.8 gal
High
43.7 gal
John Deere 5085M Extra Hydraulic Notes
Hydraulic flow note
The John Deere 5085M’s implement flow figure is about 18.4 GPM, so hydraulic attachment choice should be based on flow demand, not horsepower alone.
Hydraulic pressure note
At 2,828 psi, the John Deere 5085M’s hydraulic system pressure matters most for lift force, cylinder force and loader response.
Rear remotes / SCV note
Rear remotes / SCVs depend on the tractor’s hydraulic package and options.
For hydraulic implements, match the implement to the available hydraulic flow (18.4 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
System type matters on the John Deere 5085M: open-center affects how hydraulic flow and pressure are delivered to valves and implements.
Hydraulic fluid capacity note
The John Deere 5085M’s hydraulic fluid capacity is listed as 15.8 gal; check the operator manual before servicing because capacity can change with transmission, hydraulic options and market.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
