The John Deere 5080M is 153 in long, 89 in wide, and 102.2 in tall, with a 88.6 in wheelbase.
Length153 in (12 ft 9 in) / 3,886.2 mm
Width89 in (7 ft 5 in) / 2,260.6 mm
Height102.2 in (8 ft 6.2 in) / 2,595.9 mm
Wheelbase88.6 in (7 ft 4.6 in) / 2,250.4 mm
Ground clearance15.4 in (1 ft 3.4 in) / 391.2 mm
John Deere 5080M Dimensions
Overall length
153 in (12 ft 9 in) / 3,886.2 mm
Overall width
89 in (7 ft 5 in) / 2,260.6 mm
Overall height
102.2 in (8 ft 6.2 in) / 2,595.9 mm
Wheelbase
88.6 in (7 ft 4.6 in) / 2,250.4 mm
Ground clearance
15.4 in (1 ft 3.4 in) / 391.2 mm
Tractor Size Comparison Chart
Overall length comparison
This model
153 in
Average
125.2 in
Low
44.5 in
High
346.3 in
Overall width comparison
This model
89 in
Average
70 in
Low
20 in
High
176 in
Overall height comparison
This model
102.2 in
Average
79.8 in
Low
36 in
High
156 in
Wheelbase comparison
This model
88.6 in
Average
82.8 in
Low
34.8 in
High
190.5 in
Ground clearance comparison
This model
15.4 in
Average
16.3 in
Low
3.5 in
High
65.4 in
John Deere 5080M Extra Dimension Notes
Size class note
The John Deere 5080M size data makes the most sense when viewed as a utility tractor. It is better suited to farm work, loader jobs, hay, livestock properties and machinery-shed storage than tight residential spaces.
Storage fit note
The John Deere 5080M can fit smaller farm storage setups if the opening is right. With length 153 in (12 ft 9 in) / 3,886.2 mm, width 89 in (7 ft 5 in) / 2,260.6 mm, and height 102.2 in (8 ft 6.2 in) / 2,595.9 mm, do not ignore cab/ROPS height.
Fitment note
The John Deere 5080M size numbers are length at 153 in (12 ft 9 in) / 3,886.2 mm, width at 89 in (7 ft 5 in) / 2,260.6 mm, and height at 102.2 in (8 ft 6.2 in) / 2,595.9 mm. Use those before assuming it will fit into an existing bay or shed.
Wheelbase note
The John Deere 5080M wheelbase spec is 88.6 in (7 ft 4.6 in) / 2,250.4 mm, which gives better size context than length alone.
Ground clearance note
The John Deere 5080M gives 15.4 in (1 ft 3.4 in) / 391.2 mm ground clearance. Use it when judging ruts, crop clearance and rough access.
Storage Tips
Use a tall garage, barn bay or small machinery shed as the first storage check for the John Deere 5080M.
If the tractor is stored with a loader or rear implement, add more bay depth than the bare length suggests.
Wheelbase is 88.6 in, so leave room to line it up cleanly rather than forcing it through a tight angle.
For taller tractors, a door that looks close is not good enough – measure it.
Storage FAQ
Will it fit in a garage?
If the tractor is stored bare, compare your garage to 153 in long, 89 in wide and 102.2 in tall. If you want normal parking room, use around 12 ft high, 10 ft wide, and 18 ft deep instead.
What size door should I check?
The clean check is 12 ft high, 10 ft wide and 18 ft deep. That gives margin over the listed 102.2 in height, 89 in width and 153 in length.
Do attachments change the storage size?
Yes. Measure the tractor in storage trim: highest point compared with 102.2 in, widest point compared with 89 in, and longest parked length compared with 153 in.
How much maneuvering room should I allow?
If you cannot approach straight, go wider than 10 ft. With 89 in tractor width and a 88.6 in wheelbase, angled entries need extra side margin.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
