For the John Deere 5055E, coolant capacity is 2.5 gal (9.5 L). Coolant choice is listed as John Deere Cool-Gard, with For the John Deere 5055E tractor, the recommended coolant is John Deere COOL-GARD, which guidance.
Coolant capacity2.5 gal (9.5 L)Cooling system refill amount
Antifreeze mixFor the John Deere 5055E tractor, the recommended coolant is John Deere COOL-GARD, whichFreeze/boil protection
John Deere 5055E Coolant Capacity Specs
Coolant capacity
2.5 gal (9.5 L)
Coolant type
John Deere Cool-Gard
Antifreeze mix
For the John Deere 5055E tractor, the recommended coolant is John Deere COOL-GARD, which
Engine horsepower
55 hp
Engine displacement
2.9 L (177 cu in)
John Deere 5055E Coolant Capacity Guide
Coolant capacity guide
This model
2.5 gal
Class low
4 gal
Class typical
6.5 gal
Class high
10 gal
Compared with a broad utility tractor guide, not the full tractor dataset.
John Deere 5055E Coolant Service Notes
Coolant capacity note
The John Deere 5055E cooling system is listed at 2.5 gal (9.5 L). Final level can settle after the first heat cycle, so recheck the level after service
Coolant service note
For a full coolant service on the John Deere 5055E, plan around 2.5 gal (9.5 L) and match the listed coolant guidance: John Deere Cool-Gard and For the John Deere 5055E tractor, the recommended coolant is John Deere COOL-GARD, which
Coolant type note
The John Deere 5055E coolant type is John Deere Cool-Gard. Wrong coolant chemistry can reduce corrosion, freeze and boil protection
Antifreeze mix note
The listed mix for the John Deere 5055E is For the John Deere 5055E tractor, the recommended coolant is John Deere COOL-GARD, which. Keep the coolant strength in range after a drain, flush or top-up
Refill check
After a drain and refill on the John Deere 5055E, the cooling system can burp air. Recheck the level after the first warm-up and cool-down cycle
Engine context
For comparison, the John Deere 5055E engine details listed here are engine horsepower 55 hp and engine displacement 2.9 L (177 cu in). The coolant capacity remains the service number to use for refilling
John Deere 5055E Coolant Capacity FAQ
How much coolant does the John Deere 5055E take?
Plan around 2.5 gal (9.5 L) when servicing coolant on the John Deere 5055E. Recheck the system when cool because air pockets can lower the level
Does the John Deere 5055E use John Deere Cool-Gard coolant?
Coolant type for the John Deere 5055E is listed as John Deere Cool-Gard. If the system has been filled with something else before, confirm compatibility before mixing
What coolant mix is listed for the John Deere 5055E?
The John Deere 5055E coolant mix guidance is For the John Deere 5055E tractor, the recommended coolant is John Deere COOL-GARD, which. Keep the mix consistent when topping up so freeze and boil protection stay in range
Do I need to recheck coolant level after servicing the John Deere 5055E?
Yes. Use the 2.5 gal (9.5 L) figure as the refill guide, but always recheck level after warm-up and cool-down because trapped air can move through the system
When should contaminated coolant be replaced in the John Deere 5055E?
If the John Deere 5055E coolant is only slightly low and otherwise clean, topping up with compatible coolant can be enough. If condition is poor, drain and refill instead
Official information note
Mistakes do happen. Tractor coolant capacity and coolant type can change by year, market, engine, radiator setup and service procedure. Check the operator manual, service manual and official deere.com website before draining, flushing or refilling the cooling system.
