The John Deere 5047D tractor hydraulic pump flow is 6.6 GPM, and hydraulic system pressure is 2,828 psi.
Hydraulic pump flow6.6 GPM
Implement flow6.6 GPM
Total hydraulic flow12.5 GPM
Hydraulic pressure2,828 psi
Hydraulic system typeopen-center
Hydraulic fluid capacity10 gal
John Deere 5047D Hydraulic Flow Details
Hydraulic pump flow
6.6 GPM
Implement hydraulic flow
6.6 GPM
Total hydraulic flow
12.5 GPM
Hydraulic system pressure
2,828 psi
Hydraulic system type
open-center
Hydraulic fluid capacity
10 gal
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
6.6 GPM
Average
17.3 GPM
Low
1.2 GPM
High
110 GPM
Implement hydraulic flow comparison
This model
6.6 GPM
Average
17.1 GPM
Low
1.2 GPM
High
110 GPM
Total hydraulic flow comparison
This model
12.5 GPM
Average
16.5 GPM
Low
1.2 GPM
High
70 GPM
Hydraulic pressure comparison
This model
2,828 psi
Average
2,330.1 psi
Low
435 psi
High
3,625 psi
Hydraulic fluid capacity comparison
This model
10 gal
Average
8.6 gal
Low
0.6 gal
High
30.1 gal
John Deere 5047D Extra Hydraulic Notes
Hydraulic flow note
The John Deere 5047D separates implement flow from total hydraulic flow: 6.6 GPM is the more useful number for rear remotes and hydraulic implements, while 12.5 GPM includes the wider system total.
Hydraulic pressure note
Hydraulic pressure on the John Deere 5047D is 2,828 psi, but hydraulic performance depends on pressure and flow together.
Rear remotes / SCV note
Rear remotes / SCVs depend on the tractor’s hydraulic package and options.
For hydraulic implements, match the implement to the available hydraulic flow (6.6 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
The John Deere 5047D uses a open-center hydraulic setup, so compatibility depends on both the attachment and valve configuration.
Hydraulic fluid capacity note
The John Deere 5047D’s hydraulic fluid capacity is listed as 10 gal; check the operator manual before servicing because capacity can change with transmission, hydraulic options and market.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
