The John Deere 5045E has a 3-point hitch lift capacity of 3,192 lb (1,448 kg) at 24 in / 610 mm behind the hitch. It also lists hitch category Category 2 and rear PTO power 37 hp.
Best rear lift figure3,192 lb (1,448 kg)
Lift at 24 in / 610 mm3,192 lb (1,448 kg)
Hitch categoryCategory 2
Rear PTO horsepower37 hp
John Deere 5045E 3-Point Hitch Lift Capacity
3-point hitch lift capacity
3,968 lb (1,800 kg)
Lift capacity at 24 in / 610 mm
3,192 lb (1,448 kg)
Hitch category
Category 2
Rear PTO horsepower
37 hp
Rear Lift Capacity Comparison Chart
Best rear lift comparison
This model
3,192 lb
Average
8,101 lb
Low
550 lb
High
29,750 lb
Lift at 24 in comparison
This model
3,192 lb
Average
7,292 lb
Low
550 lb
High
29,750 lb
Rear PTO horsepower comparison
This model
37 hp
Average
132 hp
Low
11 hp
High
620 hp
John Deere 5045E Hitch and Rear Lift Notes
Rear lift capacity note
For implement matching, the John Deere 5045E should be judged from the 3,192 lb (1,448 kg) lift at 24 in / 610 mm figure. That gives a better real-world read than horsepower alone
24 in / 610 mm lift note
A 24 in / 610 mm rating matters because weight gets harder to lift as it moves farther behind the tractor
Hitch category note
The John Deere 5045E uses Category 2 hitch sizing in the captured data. Category mismatch is how people end up with implements that do not fit cleanly
PTO and weight context
The extra context for the John Deere 5045E is simple: rear PTO horsepower is 37 hp. That helps separate what it can lift from what it can actually run well
Rear implement matching
The John Deere 5045E hitch spec is useful because it helps judge whether attachments like rotary cutter, medium tiller, grader blade, seeder, and heavy ballast box are in the right size range
John Deere 5045E 3-Point Hitch FAQ
How strong is the John Deere 5045E 3-point hitch?
The John Deere 5045E hitch data points to 3,192 lb (1,448 kg) for lift at 24 in / 610 mm. In practical terms, this puts it in utility rear-lift tractor territory.
What does the John Deere 5045E 24-inch lift capacity mean?
It means the John Deere 5045E is rated to lift 3,192 lb (1,448 kg) with the load measured 24 in / 610 mm behind the hitch. That is usually closer to real implement use than a hitch-end-only number.
Can the John Deere 5045E use any rear implement?
No. Start with the Category 2 hitch category, then check implement weight against the 3,192 lb (1,448 kg) rating at 24 in / 610 mm behind the hitch.
How should I match rear implements to the John Deere 5045E?
Start with 3,192 lb (1,448 kg) for lift at 24 in / 610 mm, then compare the actual implement weight and overhang. Typical checks include rotary cutter, medium tiller, grader blade, seeder, and heavy ballast box.
Is 37 hp rear PTO power enough for implements?
It depends on the implement. Use 37 hp for powered equipment matching, and use 3,192 lb (1,448 kg) for rear lift matching.
Official information note
Mistakes do happen. Tractor hitch lift specs can change by year, market, tire setup, ballast, hitch option and measurement point. Please check the operator manual, build sheet and official deere.com website for official information before buying or lifting heavy implements.
