The John Deere 5042D tractor hydraulic pump flow is 6.6 GPM, and hydraulic system pressure is 2,828 psi.
Hydraulic pump flow6.6 GPM
Implement flow11.4 GPM
Total hydraulic flow11.4 GPM
Hydraulic pressure2,828 psi
Hydraulic system typeclosed-center
Hydraulic fluid capacity9.2 gal
John Deere 5042D Hydraulic Flow Details
Hydraulic pump flow
6.6 GPM
Implement hydraulic flow
11.4 GPM
Total hydraulic flow
11.4 GPM
Hydraulic system pressure
2,828 psi
Hydraulic system type
closed-center
Hydraulic fluid capacity
9.2 gal
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
6.6 GPM
Average
22 GPM
Low
5.3 GPM
High
59 GPM
Implement hydraulic flow comparison
This model
11.4 GPM
Average
21.7 GPM
Low
5.3 GPM
High
43 GPM
Total hydraulic flow comparison
This model
11.4 GPM
Average
21.9 GPM
Low
4 GPM
High
60 GPM
Hydraulic pressure comparison
This model
2,828 psi
Average
2,726.4 psi
Low
435 psi
High
3,046 psi
Hydraulic fluid capacity comparison
This model
9.2 gal
Average
14.9 gal
Low
2.8 gal
High
43.7 gal
John Deere 5042D Extra Hydraulic Notes
Hydraulic flow note
For hydraulic work, the key number on the John Deere 5042D is 11.4 GPM implement flow; that points toward normal loader use, small hydraulic implements and general utility work.
Hydraulic pressure note
Hydraulic pressure on the John Deere 5042D is 2,828 psi, but hydraulic performance depends on pressure and flow together.
Rear remotes / SCV note
Rear remotes / SCVs depend on the tractor’s hydraulic package and options.
For hydraulic implements, match the implement to the available hydraulic flow (11.4 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
The John Deere 5042D’s hydraulic system type is closed-center, which is built for higher-pressure hydraulic control than a basic open-center setup.
Hydraulic fluid capacity note
For maintenance, the John Deere 5042D’s hydraulic fluid capacity matters more than flow rate because it affects oil changes, filter service and refill quantity.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
