The John Deere 5036C tractor hydraulic pump flow is 25.5 GPM, and hydraulic system pressure is 2,828 psi.
Hydraulic pump flow25.5 GPM
Implement flow5.3 GPM
Total hydraulic flow5.3 GPM
Hydraulic pressure2,828 psi
Hydraulic system typeopen-center
Hydraulic fluid capacity10 gal
John Deere 5036C Hydraulic Flow Details
Hydraulic pump flow
25.5 GPM
Implement hydraulic flow
5.3 GPM
Total hydraulic flow
5.3 GPM
Hydraulic system pressure
2,828 psi
Hydraulic system type
open-center
Hydraulic fluid capacity
10 gal
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
25.5 GPM
Average
22 GPM
Low
5.3 GPM
High
59 GPM
Implement hydraulic flow comparison
This model
5.3 GPM
Average
21.7 GPM
Low
5.3 GPM
High
43 GPM
Total hydraulic flow comparison
This model
5.3 GPM
Average
21.9 GPM
Low
4 GPM
High
60 GPM
Hydraulic pressure comparison
This model
2,828 psi
Average
2,726.4 psi
Low
435 psi
High
3,046 psi
Hydraulic fluid capacity comparison
This model
10 gal
Average
14.9 gal
Low
2.8 gal
High
43.7 gal
John Deere 5036C Extra Hydraulic Notes
Hydraulic flow note
With about 5.3 GPM implement flow, the John Deere 5036C sits in the low-flow compact tractor range and is best suited to loader work, steering and simple implements, but not high-demand continuous hydraulic attachments.
Hydraulic pressure note
Hydraulic pressure on the John Deere 5036C is 2,828 psi, but hydraulic performance depends on pressure and flow together.
Rear remotes / SCV note
Rear remotes / SCVs depend on the tractor’s hydraulic package and options.
For hydraulic implements, match the implement to the available hydraulic flow (5.3 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
The John Deere 5036C uses a open-center hydraulic setup, so compatibility depends on both the attachment and valve configuration.
Hydraulic fluid capacity note
The John Deere 5036C’s hydraulic fluid capacity is listed as 10 gal; check the operator manual before servicing because capacity can change with transmission, hydraulic options and market.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
