The John Deere 4730 is 152 in tall, with a 169.3 in wheelbase.
Height152 in (12 ft 8 in) / 3,860.8 mm
Wheelbase169.3 in (14 ft 1.3 in) / 4,300.2 mm
Ground clearance61.5 in (5 ft 1.5 in) / 1,562.1 mm
John Deere 4730 Dimensions
Overall height
152 in (12 ft 8 in) / 3,860.8 mm
Wheelbase
169.3 in (14 ft 1.3 in) / 4,300.2 mm
Ground clearance
61.5 in (5 ft 1.5 in) / 1,562.1 mm
Tractor Size Comparison Chart
Overall height comparison
This model
152 in
Average
86.2 in
Low
39.8 in
High
152 in
Wheelbase comparison
This model
169.3 in
Average
79.2 in
Low
34.8 in
High
190.5 in
Ground clearance comparison
This model
61.5 in
Average
16.4 in
Low
3.5 in
High
65.4 in
John Deere 4730 Extra Dimension Notes
Storage fit note
The John Deere 4730 is not a tight-shed machine. With height 152 in (12 ft 8 in) / 3,860.8 mm, use big machinery-bay assumptions.
Wheelbase note
The John Deere 4730’s 169.3 in (14 ft 1.3 in) / 4,300.2 mm wheelbase gives useful context to the overall length. It shows how much of the tractor is actual chassis span.
Ground clearance note
The John Deere 4730 clearance value is 61.5 in (5 ft 1.5 in) / 1,562.1 mm. It is not a storage spec, but it matters in working conditions.
Storage Tips
Plan storage for the John Deere 4730 like a big field tractor, not a compact utility machine.
Recommended storage clearance: target about 192 in (16 ft) clear height.
For this class, doorway width and attachment clearance are major planning numbers.
Use the 169.3 in wheelbase as a clue for how much approach room is needed near the shed entrance.
Overhead clearance should be measured at the lowest part of the doorway, not the tallest part of the shed.
Storage FAQ
Will it fit in a garage?
For storage fit, the useful question is whether the space clears 152 in height, width not captured width and length not captured length with margin. Around 16 ft high is the no-drama check.
What size door should I check?
Start with the hard numbers: 152 in high, width not captured wide and length not captured long. Then step up to a practical storage target of about 16 ft high.
Do attachments change the storage size?
Yes. Treat length not captured as the bare length only. If front or rear gear stays fitted, add roughly 8 ft to 15 ft to the depth check before trusting the fit.
How much maneuvering room should I allow?
For easier parking, keep the final approach straight and clear. With a 169.3 in wheelbase and width not captured width, tight offset entries are where damage happens.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
