The John Deere 4720 tractor hydraulic pump flow is 12 GPM, and hydraulic system pressure is 2,500 psi.
Hydraulic pump flow12 GPM
Implement flow12 GPM
Total hydraulic flow17.1 GPM
Hydraulic pressure2,500 psi
Hydraulic system typeopen-center
Hydraulic fluid capacity9.6 gal
John Deere 4720 Hydraulic Flow Details
Hydraulic pump flow
12 GPM
Implement hydraulic flow
12 GPM
Total hydraulic flow
17.1 GPM
Hydraulic system pressure
2,500 psi
Hydraulic system type
open-center
Hydraulic fluid capacity
9.6 gal
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
12 GPM
Average
17.3 GPM
Low
1.2 GPM
High
110 GPM
Implement hydraulic flow comparison
This model
12 GPM
Average
17.1 GPM
Low
1.2 GPM
High
110 GPM
Total hydraulic flow comparison
This model
17.1 GPM
Average
16.5 GPM
Low
1.2 GPM
High
70 GPM
Hydraulic pressure comparison
This model
2,500 psi
Average
2,330.1 psi
Low
435 psi
High
3,625 psi
Hydraulic fluid capacity comparison
This model
9.6 gal
Average
8.6 gal
Low
0.6 gal
High
30.1 gal
John Deere 4720 Extra Hydraulic Notes
Hydraulic flow note
The John Deere 4720’s total flow is higher than implement flow, so use the implement-flow number when matching hydraulic tools and SCV-driven equipment.
Hydraulic pressure note
At 2,500 psi, the John Deere 4720’s hydraulic system pressure matters most for lift force, cylinder force and loader response.
Rear remotes / SCV note
Rear remotes / SCVs depend on the tractor’s hydraulic package and options.
For hydraulic implements, match the implement to the available hydraulic flow (12 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
The John Deere 4720 uses a open-center hydraulic setup, so compatibility depends on both the attachment and valve configuration.
Hydraulic fluid capacity note
Hydraulic fluid capacity on the John Deere 4720 is 9.6 gal, but the correct oil type and fill/check procedure should still come from the official manual.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
