The John Deere 4710 tractor hydraulic pump flow is 15.9 GPM, and hydraulic system pressure is 2,500 psi.
Hydraulic pump flow15.9 GPM
Implement flow14.7 GPM
Total hydraulic flow15.9 GPM
Hydraulic pressure2,500 psi
Hydraulic system typeclosed-center
Hydraulic fluid capacity9.7 gal
John Deere 4710 Hydraulic Flow Details
Hydraulic pump flow
15.9 GPM
Implement hydraulic flow
14.7 GPM
Total hydraulic flow
15.9 GPM
Hydraulic system pressure
2,500 psi
Hydraulic system type
closed-center
Hydraulic fluid capacity
9.7 gal
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
15.9 GPM
Average
22 GPM
Low
5.3 GPM
High
59 GPM
Implement hydraulic flow comparison
This model
14.7 GPM
Average
21.7 GPM
Low
5.3 GPM
High
43 GPM
Total hydraulic flow comparison
This model
15.9 GPM
Average
21.9 GPM
Low
4 GPM
High
60 GPM
Hydraulic pressure comparison
This model
2,500 psi
Average
2,726.4 psi
Low
435 psi
High
3,046 psi
Hydraulic fluid capacity comparison
This model
9.7 gal
Average
14.9 gal
Low
2.8 gal
High
43.7 gal
John Deere 4710 Extra Hydraulic Notes
Hydraulic flow note
The John Deere 4710 separates implement flow from total hydraulic flow: 14.7 GPM is the more useful number for rear remotes and hydraulic implements, while 15.9 GPM includes the wider system total.
Hydraulic pressure note
Hydraulic pressure on the John Deere 4710 is 2,500 psi, but hydraulic performance depends on pressure and flow together.
Rear remotes / SCV note
Rear remotes / SCVs depend on the tractor’s hydraulic package and options.
For hydraulic implements, match the implement to the available hydraulic flow (14.7 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
The John Deere 4710 uses a closed-center hydraulic setup, so compatibility depends on both the attachment and valve configuration.
Hydraulic fluid capacity note
The John Deere 4710’s hydraulic fluid capacity is listed as 9.7 gal; check the operator manual before servicing because capacity can change with transmission, hydraulic options and market.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
