Fuel tank capacity for the John Deere 4510 is 12.52 gal (47.4 L). That equals 6.26 gal (23.7 L) at half tank, with diesel listed as the fuel type.
Fuel tank capacity12.52 gal (47.4 L)Empty-to-full tank amount
Half tank6.26 gal (23.7 L)Planning guide
5-gal cansabout 3 x 5-gal cans to have enough fuel from emptyPortable fuel estimate
Fuel typedieselUse correct fuel
John Deere 4510 fuel tank capacity specs
Fuel tank capacity
12.52 gal (47.4 L)
Fuel capacity in litres
47.4 L
Half tank amount
6.26 gal (23.7 L)
5-gallon fuel cans
about 3 x 5-gal cans to have enough fuel from empty
10-litre fuel jugs
5 x 10-L jugs
Fuel type
diesel
Estimated full tank fuel weight
89 lb (40 kg) of diesel
Engine model
Yanmar 4TNE84
Engine horsepower
38.4 hp
Engine displacement
122 cu in (2 L)
Fuel capacity per horsepower
0.326 gal per hp
Fuel capacity is a tank-size figure. Actual top-up amount and runtime depend on remaining fuel, workload, throttle use, terrain and machine condition.
John Deere 4510 fuel planning notes
Fuel capacity note
For the John Deere 4510, fuel tank capacity is 12.52 gal (47.4 L). This helps with fill-up planning, fuel storage and estimating how much fuel to bring to a job.
Refill planning
For an empty-to-full refill on the John Deere 4510, plan for about 3 x 5-gal cans or 5 x 10-L jugs. Real fill amount can be slightly lower if fuel remains in the tank.
Fuel type note
Fuel type matters on the John Deere 4510. The listed type is diesel, so use the correct fuel before judging performance or runtime.
Full tank weight
For transport and storage planning, the John Deere 4510 full tank fuel load is roughly 89 lb (40 kg) of diesel. Actual weight varies slightly by fuel blend and temperature.
Engine context
The John Deere 4510 engine specs listed with this page are engine model Yanmar 4TNE84, engine horsepower 38.4 hp, engine displacement 122 cu in (2 L), and tank-to-power ratio 0.326 gal per hp. They help compare models but are not a fuel-consumption rating.
Fuel tank capacity guide
This model
12.52 gal
Guide low
6 gal
Guide typical
14 gal
Guide high
30 gal
Compared with a broad Compact / small utility tractor guide, not the full tractor dataset.
John Deere 4510 fuel capacity FAQ
What is the empty-to-full fuel amount for the John Deere 4510?
The listed fuel capacity for the John Deere 4510 is 12.52 gal (47.4 L). Treat it as the full tank size when planning fuel.
How many litres is the John Deere 4510 fuel tank?
The John Deere 4510 fuel tank is 12.52 gal (47.4 L), which converts to about 47.4 litres.
What is the half-tank amount for the John Deere 4510?
The John Deere 4510 half-tank amount is 6.26 gal (23.7 L). If the machine is on a slope, the gauge may read differently.
How many fuel cans are needed to fill the John Deere 4510?
To fill the John Deere 4510 from empty, budget about 3 x 5-gal cans or 5 x 10-L jugs. If it is only low rather than empty, reduce that amount.
Does the John Deere 4510 use gasoline?
Use diesel in the John Deere 4510 where that listing applies. Wrong fuel can create a much bigger problem than a low tank.
How far can the John Deere 4510 go on a tank?
The John Deere 4510 tank size is 12.52 gal (47.4 L), but runtime changes with workload. Fuel use is higher with loader work, rotary cutting, tilling, snow work, hill work or heavy PTO use than with light mowing, transport or light yard work.
Is the John Deere 4510 fuel tank small or large?
The John Deere 4510 tank is a small-to-utility size at 12.52 gal (47.4 L). It is easy to plan around standard 5-gallon cans.
Official information note
Mistakes do happen. Check the operator manual, service manual and official deere.com website for official fuel capacity specifications.
