For the John Deere 4440, coolant capacity is 9 gal (34.1 L). Coolant choice is listed as John Deere Cool-Gard II, with 40/60 coolant and water mix guidance.
Coolant capacity9 gal (34.1 L)Cooling system refill amount
Antifreeze mix40/60 coolant and water mixFreeze/boil protection
John Deere 4440 Coolant Capacity Specs
Coolant capacity
9 gal (34.1 L)
Coolant type
John Deere Cool-Gard II
Antifreeze mix
40/60 coolant and water mix
Engine displacement
466 cu in (7.64 L)
John Deere 4440 Coolant Capacity Guide
Coolant capacity guide
This model
9 gal
Class low
1.5 gal
Class typical
3.5 gal
Class high
6 gal
Compared with a broad compact tractor guide, not the full tractor dataset.
John Deere 4440 Coolant Service Notes
Coolant capacity note
The main coolant number for the John Deere 4440 is 9 gal (34.1 L). Use it as the cooling-system refill amount, then check the radiator or overflow level after the engine has warmed up and cooled down
Coolant service note
For a full coolant service on the John Deere 4440, plan around 9 gal (34.1 L) and match the listed coolant guidance: John Deere Cool-Gard II and 40/60 coolant and water mix
Coolant type note
The John Deere 4440 coolant type is John Deere Cool-Gard II. Wrong coolant chemistry can reduce corrosion, freeze and boil protection
Antifreeze mix note
The listed mix for the John Deere 4440 is 40/60 coolant and water mix. Keep the coolant strength in range after a drain, flush or top-up
Refill check
After a drain and refill on the John Deere 4440, the cooling system can burp air. Recheck the level after the first warm-up and cool-down cycle
Engine context
For comparison, the John Deere 4440 engine details listed here are engine displacement 466 cu in (7.64 L). The coolant capacity remains the service number to use for refilling
John Deere 4440 Coolant Capacity FAQ
What is the full coolant refill capacity for the John Deere 4440?
Plan around 9 gal (34.1 L) when servicing coolant on the John Deere 4440. Recheck the system when cool because air pockets can lower the level
What coolant should I put in the John Deere 4440?
Coolant type for the John Deere 4440 is listed as John Deere Cool-Gard II. If the system has been filled with something else before, confirm compatibility before mixing
What coolant mix is listed for the John Deere 4440?
Use the listed 40/60 coolant and water mix mix when refilling the John Deere 4440. Too much water weakens protection; too much concentrate can also reduce cooling performance
Should the John Deere 4440 coolant be checked hot or cold?
Yes. Use the 9 gal (34.1 L) figure as the refill guide, but always recheck level after warm-up and cool-down because trapped air can move through the system
What signs mean the John Deere 4440 coolant should be flushed?
If the John Deere 4440 coolant is only slightly low and otherwise clean, topping up with compatible coolant can be enough. If condition is poor, drain and refill instead
Official information note
Mistakes do happen. Tractor coolant capacity and coolant type can change by year, market, engine, radiator setup and service procedure. Check the operator manual, service manual and official deere.com website before draining, flushing or refilling the cooling system.
