The John Deere 4410 is 108 in long, 48 in wide, and 84 in tall, with a 68 in wheelbase.
Length108 in (9 ft 0 in) / 2,743.2 mm
Width48 in (4 ft 0 in) / 1,219.2 mm
Height84 in (7 ft 0 in) / 2,133.6 mm
Wheelbase68 in (5 ft 8 in) / 1,727.2 mm
Ground clearance13.4 in (1 ft 1.4 in) / 340.4 mm
John Deere 4410 Dimensions
Overall length
108 in (9 ft 0 in) / 2,743.2 mm
Overall width
48 in (4 ft 0 in) / 1,219.2 mm
Overall height
84 in (7 ft 0 in) / 2,133.6 mm
Wheelbase
68 in (5 ft 8 in) / 1,727.2 mm
Ground clearance
13.4 in (1 ft 1.4 in) / 340.4 mm
Tractor Size Comparison Chart
Overall length comparison
This model
108 in
Average
125.2 in
Low
44.5 in
High
346.3 in
Overall width comparison
This model
48 in
Average
70 in
Low
20 in
High
176 in
Overall height comparison
This model
84 in
Average
79.8 in
Low
36 in
High
156 in
Wheelbase comparison
This model
68 in
Average
82.8 in
Low
34.8 in
High
190.5 in
Ground clearance comparison
This model
13.4 in
Average
16.3 in
Low
3.5 in
High
65.4 in
John Deere 4410 Extra Dimension Notes
Size class note
The John Deere 4410 should be judged as a small compact tractor before deciding if it fits storage or transport. It is sized more for acreage, yard work, loader jobs and tight property access than large field work.
Fitment note
The John Deere 4410 has listed dimensions of length at 108 in (9 ft 0 in) / 2,743.2 mm, width at 48 in (4 ft 0 in) / 1,219.2 mm, and height at 84 in (7 ft 0 in) / 2,133.6 mm. Treat them as the starting point for storage and trailer planning.
Wheelbase note
The John Deere 4410 wheelbase is listed at 68 in (5 ft 8 in) / 1,727.2 mm. Wheelbase helps explain how planted or compact the tractor feels compared with similar models.
Ground clearance note
The John Deere 4410 shows 13.4 in (1 ft 1.4 in) / 340.4 mm ground clearance. That is the underside clearance figure in the dimension set.
Storage Tips
Floor space is not enough; check the door height, side clearance and attachment length.
This is a smaller tractor class, so tight acreage sheds and small equipment bays are realistic if the doorway clears.
Use the 68 in wheelbase as a clue for how much approach room is needed near the shed entrance.
Storage FAQ
Will it fit in a garage?
If your garage door is close to 84 in tall or 48 in wide, count it as too tight. The safer check for the John Deere 4410 is around 8 ft high, 8 ft wide, and 15 ft deep.
What size door should I check?
The clean check is 8 ft high, 8 ft wide and 15 ft deep. That gives margin over the listed 84 in height, 48 in width and 108 in length.
Do attachments change the storage size?
Yes. Check attachments against all three numbers: 84 in for overhead clearance, 48 in for side clearance and 108 in for bay depth.
How much maneuvering room should I allow?
Use the 68 in wheelbase plus the 108 in length together. The tractor may clear the doorway but still need space to swing the front or rear around.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
