The John Deere 4250 is 96 in wide, with a 106.8 in wheelbase.
Width96 in (8 ft 0 in) / 2,438.4 mm
Wheelbase106.8 in (8 ft 10.8 in) / 2,712.7 mm
Ground clearance15.8 in (1 ft 3.8 in) / 401.3 mm
John Deere 4250 Dimensions
Overall width
96 in (8 ft 0 in) / 2,438.4 mm
Wheelbase
106.8 in (8 ft 10.8 in) / 2,712.7 mm
Ground clearance
15.8 in (1 ft 3.8 in) / 401.3 mm
Tractor Size Comparison Chart
Overall width comparison
This model
96 in
Average
70 in
Low
20 in
High
176 in
Wheelbase comparison
This model
106.8 in
Average
82.8 in
Low
34.8 in
High
190.5 in
Ground clearance comparison
This model
15.8 in
Average
16.3 in
Low
3.5 in
High
65.4 in
John Deere 4250 Extra Dimension Notes
Storage fit note
The John Deere 4250 is a mid-size storage job. With width 96 in (8 ft 0 in) / 2,438.4 mm, a tall garage may work; a low garage may not.
Fitment note
The John Deere 4250 dimension figures are width at 96 in (8 ft 0 in) / 2,438.4 mm. Match these against shed height, gate width and trailer length.
Wheelbase note
The John Deere 4250 wheelbase figure is 106.8 in (8 ft 10.8 in) / 2,712.7 mm. This is a useful comparison spec when looking at overall size and maneuverability.
Ground clearance note
The John Deere 4250 clearance listing is 15.8 in (1 ft 3.8 in) / 401.3 mm. Use it with tire size and axle setup when judging real-world clearance.
Storage Tips
The John Deere 4250 is not tiny, so doorway height and approach angle matter more than floor area alone.
A straight approach into the bay matters more as tractor width and wheelbase increase.
Big tractors need service room around them, not just enough space to squeeze inside.
A 106.8 in wheelbase means the approach into the storage bay matters, not just the doorway width.
Storage FAQ
Will it fit in a garage?
The John Deere 4250 is length not captured long, 96 in wide and height not captured tall, so a garage only makes sense if it beats those numbers with real clearance. A practical check is 12 ft wide.
What size door should I check?
Use the John Deere 4250’s dimensions directly: height not captured tall needs more than a height not captured opening, 96 in wide needs side clearance, and length not captured long needs about the tractor length plus attachment room bay depth.
Do attachments change the storage size?
Yes. The more the shed fit depends on the exact length not captured length, the more you should remove attachments or choose a deeper bay.
How much maneuvering room should I allow?
Leave turning room outside and walk-around room inside. The tractor is length not captured long, 96 in wide, and has a 106.8 in wheelbase, so a tight turn beside posts or fences is the real problem.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
